Home › Engine / Hybrid System › 2WW EMISSION CONTROL › EXHAUST GAS TEMPERATURE SENSOR(for Sensor 2) › from 2015.10
RM3090E _51 Engine / Hybrid System _044375 2WW EMISSION CONTROL _0210866 EXHAUST GAS TEMPERATURE SENSOR(for Sensor 2) G

2WW EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for Sensor 2)  INSPECTION  


PROCEDURE

Hide 89425 1.INSPECT EXHAUST GAS TEMPERATURE SENSOR (for Sensor 2)

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 - 40°C (- 40°F) 64.2 to 149.0 kΩ
0°C (32°F) 22.1 to 37.0 kΩ
100°C (212°F) 2.35 to 3.34 kΩ


HINT:

The temperature indicated under "Condition" is the temperature of the exhaust gas temperature sensor.


If the result is not as specified, replace the exhaust gas temperature sensor.