Home › Engine / Hybrid System › 2WW INTAKE / EXHAUST › INTAKE MANIFOLD › from 2015.10
RM3090E _51 Engine / Hybrid System _044376 2WW INTAKE / EXHAUST _0210931 INTAKE MANIFOLD G

2WW INTAKE / EXHAUST  INTAKE MANIFOLD  INSPECTION  


PROCEDURE

Hide 1.INSPECT SWIRL CONTROL VALVE

a.
A347382C02
1.719,1.01 2.063,0.323 2.063,0.323 2.26,0.323 true 1.969,1.083 1.625,1.771 1.625,1.771 1.427,1.771 true 0.167,0.146 0.49,0.469 0.323,0.323 10 false *a 2.365,0.24 3.031,0.417 0.667,0.177 10 false 3 (SCV+) 0.833,1.688 1.5,1.865 0.667,0.177 10 false 4 (SCV-)
*a Component without harness connected
(Swirl Control Valve)


Measure the resistance according to the value(s) in the table below.

OK:

No open or short circuit malfunction.


Standard Resistance:
Tester Connection Condition Specified Condition
3 (SCV+) - 4 (SCV-) 20°C (68°F) 22.61 to 41.99 Ω


If the result is not as specified, replace the swirl control valve.