16363
1.INSPECT COOLING FAN MOTOR
Disconnect the cooling fan motor connector.
Check that the fan rotates smoothly by hand.
| *a | Component without harness connected
(Cooling Fan Motor) |
Check that the cooling fan motor turns smoothly when the battery is connected to the cooling fan motor connector.
Measure the current according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 | 20°C (68°F) | 12.2 to 15.7 A |
If the result is not as specified, replace the cooling fan motor.
Connect the cooling fan motor connector.
16363A
2.INSPECT NO. 2 COOLING FAN MOTOR
Disconnect the No. 2 cooling fan motor connector.
Check that the No. 2 fan rotates smoothly by hand.
| *a | Component without harness connected
(No. 2 Cooling Fan Motor) |
Check that the No. 2 cooling fan motor turns smoothly when the battery is connected to the No. 2 cooling fan motor connector.
Measure the current according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 | 20°C (68°F) | 12.2 to 15.7 A |
If the result is not as specified, replace the No. 2 cooling fan motor.
Connect the No. 2 cooling fan motor connector.