Home › Engine / Hybrid System › 2WW ENGINE MECHANICAL › DRIVE BELT › from 2015.10
RM3090E _51 Engine / Hybrid System _044373 2WW ENGINE MECHANICAL _0211283 DRIVE BELT A

2WW ENGINE MECHANICAL  DRIVE BELT  REMOVAL  


PROCEDURE

Hide 1.REMOVE NO. 1 ENGINE UNDER COVER

Hide 2.REMOVE REAR ENGINE UNDER COVER RH

a.
A299168

Remove the 2 clips and rear engine under cover RH.


Hide 16361A 3.REMOVE FAN AND GENERATOR V BELT

a.
A354298C02
0.104,0.156 0.479,0.396 0.375,0.24 10 false *A 0.156,2.146 0.531,2.385 0.375,0.24 10 false *B
*A w/ Air Conditioning System
*B w/o Air Conditioning System


Rotate the pulley of the V-ribbed belt tensioner assembly clockwise to loosen the fan and generator V belt and reduce the tension. Then remove the fan and generator V belt.