Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR WEATHERSTRIP › from 2015.10
RM3090E _59 Vehicle Exterior _008794 DOOR / HATCH _0211510 BACK DOOR WEATHERSTRIP A

DOOR / HATCH  BACK DOOR WEATHERSTRIP  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

a.
B421513C01
2.031,2.708 2.302,2.49 2.302,2.49 2.49,2.49 false 2.573,2.396 2.885,2.594 0.313,0.198 10 false *a
*a Paint Mark
V100135

Marking Position
V100136

Weatherstrip Joint


Remove any non-drying sealer on the body with non-residue solvent.


b.

Align the paint marks with the positions on the body flange and install a new back door weatherstrip.

NOTICE:

Always align the paint mark when installing the part. If the paint mark position is out of place, water leaks may occur.


HINT:

To easily install the weatherstrip, first install the area with the paint mark as shown in the illustration. Then install the part toward the corners and push any excess length into the corners.