Home › Drivetrain › K114 MULTIDRIVE / CVT › PARK / NEUTRAL POSITION SWITCH › from 2015.10
RM3090E _52 Drivetrain _044380 K114 MULTIDRIVE / CVT _0212488 PARK / NEUTRAL POSITION SWITCH G

K114 MULTIDRIVE / CVT  PARK / NEUTRAL POSITION SWITCH  INSPECTION  


PROCEDURE

Hide 84540 1.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

C298182C01
0.969,1.792 1.344,1.302 true 1.323,1.813 1.469,1.302 true 1.844,1.813 1.708,1.302 true 1.823,0.948 2.292,0.313 true 1.594,0.948 1.771,0.313 true 1.417,0.948 1.229,0.302 true 1.271,0.948 0.854,0.302 true 2.344,0.25 2.656,0.448 0.313,0.198 10 false RB 1.833,0.25 2.146,0.448 0.313,0.198 10 false RL 1.042,0.25 1.354,0.448 0.313,0.198 10 false PL 0.74,0.25 1.052,0.448 0.313,0.198 10 false B 0.115,0.104 0.427,0.302 0.313,0.198 10 false *a 0.865,1.75 1.177,1.948 0.313,0.198 10 false L 1.146,1.75 1.458,1.948 0.313,0.198 10 false NL 1.896,1.75 2.208,1.948 0.313,0.198 10 false DL
*a Component without harness connected
(Park/Neutral Position Switch Assembly)


a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
4 (B) - 9 (L) Shift lever in P or N Below 1 Ω
Shift lever not in P or N 10 kΩ or higher
1 (RB) - 3 (PL) Shift lever in P Below 1 Ω
Shift lever not in P 10 kΩ or higher
1 (RB) - 2 (RL) Shift lever in R Below 1 Ω
Shift lever not in R 10 kΩ or higher
1 (RB) - 8 (NL) Shift lever in N Below 1 Ω
Shift lever not in N 10 kΩ or higher
1 (RB) - 7 (DL) Shift lever in D or M Below 1 Ω
Shift lever not in D or M 10 kΩ or higher


If the result is not as specified, replace the park/neutral position switch assembly.