Home › Power Source / Network › 2WW BATTERY / CHARGING › GENERATOR › from 2015.10
RM3090E _57 Power Source / Network _044381 2WW BATTERY / CHARGING _0212676 GENERATOR G

2WW BATTERY / CHARGING  GENERATOR  INSPECTION  


PROCEDURE

Hide 1.INSPECT BRUSH

a.
A316703C03
0.583,0.167 0.813,0.344 0.229,0.177 10 true *a
*a Exposed Length


Using a vernier caliper, measure the length of the exposed brushes.

Standard exposed length:

11.2 mm (0.441 in.)

Minimum exposed length:

2.0 mm (0.0787 in.)


If the exposed length is less than the minimum, replace the generator regulator assembly.