Home › Vehicle Interior › DOOR LOCK › TRANSMITTER BATTERY(w/o Entry and Start System) › from 2015.10
RM3090E _58 Vehicle Interior _008782 DOOR LOCK _0049908 TRANSMITTER BATTERY(w/o Entry and Start System) A

DOOR LOCK  TRANSMITTER BATTERY(w/o Entry and Start System)  REPLACEMENT  


PROCEDURE

Hide 89751A 1.REMOVE TRANSMITTER HOUSING COVER (for Type A)

a.
B317344C02
1.51,1.448 1.365,1.583 1.365,1.583 1.167,1.583 false 1,1.5 1.198,1.688 0.198,0.188 10 *1
*1 Protective Tape


Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

NOTICE:

Do not forcibly pry the cover.


HINT:
·

Tape the screwdriver tip before use.

·

Open the cover as shown in the illustration so as not to drop the button.




Hide 89071B 2.REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A)

a.
B317346C02
1.365,0.667 0.75,0.667 false 0.563,0.594 0.76,0.802 0.198,0.208 10 *1
*1 Protective Tape


Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

NOTICE:

Handle each part with care as they are delicate electrical parts.


HINT:
·

Tape the screwdriver tip before use.

·

When removing the module, be careful not to drop the button.




Hide 89745A 3.REMOVE TRANSMITTER BATTERY (for Type A)

a.
B317348

Disengage the 7 claws and remove the transmitter battery cover.


b.
B317349

Remove the transmitter battery (lithium battery: CR2016).

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery. The terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Water may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




Hide 89751B 4.REMOVE TRANSMITTER HOUSING COVER (for Type B)

NOTICE:

Take extra care when handling these precision electronic components.


a.
B426613C01
0,0 0,0 false
V100155

Protective Tape


Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

HINT:

Tape the screwdriver tip before use.



Hide 89758 5.REMOVE DOOR CONTROL TRANSMITTER PACKING (for Type B)

a.
B426608C01
0,0 0,0 false
V100155

Protective Tape


Insert a precision screwdriver into the door control transmitter packing and turn the screwdriver to remove the door control transmitter packing.

HINT:

Tape the screwdriver tip before use.



Hide 89745A 6.REMOVE TRANSMITTER BATTERY (for Type B)

a.
B426609C01
0,0 0,0 false
V100155

Protective Tape


Insert a precision screwdriver into the gap and gently remove the transmitter battery.

NOTICE:
·

Do not push the terminals with your finger.

·

Do not forcibly pry up the transmitter battery as the terminals may be damaged.

·

Do not touch the transmitter battery with wet hands. Moisture may cause rust.

·

Do not touch or move any components inside the transmitter. It may interfere with proper operation.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.



HINT:

Tape the screwdriver tip before use.



Hide 89745A 7.INSTALL TRANSMITTER BATTERY (for Type A)

a.
B317350

Install a new transmitter battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

NOTICE:
·

Be careful not to bend the transmitter battery electrode during insertion.

·

Keep the transmitter cover interior free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




b.

Engage the 7 claws and install the transmitter battery cover.


Hide 89071B 8.INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type A)

a.
B317347

Install the door control transmitter module set sub-assembly into the transmitter housing case.


Hide 89751A 9.INSTALL TRANSMITTER HOUSING COVER (for Type A)

a.
B279141

Install the transmitter housing cover to the transmitter housing case.


Hide 89745A 10.INSTALL TRANSMITTER BATTERY (for Type B)

a.
B426610

Install a new transmitter battery (lithium battery: CR1620) with the positive (+) side facing upward, as shown in the illustration.

NOTICE:
·

Do not bend the transmitter battery electrode during installation.

·

Keep the inside of the transmitter housing cover free of dust and oil.

·

When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.




Hide 89758 11.INSTALL DOOR CONTROL TRANSMITTER PACKING (for Type B)

a.
B426611

Install the door control transmitter packing by pressing down on it as shown in the illustration.


Hide 89751B 12.INSTALL TRANSMITTER HOUSING COVER (for Type B)

a.
B426612

Install the transmitter housing cover as shown in the illustration.