Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER(for 2WW) › from 2015.10
RM3090E _52 Drivetrain _008754 CLUTCH _0220759 CLUTCH RELEASE CYLINDER(for 2WW) A

CLUTCH  CLUTCH RELEASE CYLINDER(for 2WW)  DISASSEMBLY  


PROCEDURE

Hide 04313 1.REMOVE CLUTCH RELEASE CYLINDER KIT

a.

Remove the boot from the release cylinder body.


b.

Remove the push rod from the release cylinder body.


c.
C299393

Using compressed air, remove the piston and spring from the release cylinder body.

NOTICE:

Do not damage the inside of the release cylinder body.



Hide 31477 2.REMOVE RELEASE CYLINDER BLEEDER PLUG

a.

Remove the breeder plug cap from the release cylinder bleeder plug.


b.
C299392

Remove the release cylinder bleeder plug from the release cylinder body.