Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER(for 2WW) › from 2015.10
RM3090E _52 Drivetrain _008754 CLUTCH _0220759 CLUTCH RELEASE CYLINDER(for 2WW) A

CLUTCH  CLUTCH RELEASE CYLINDER(for 2WW)  REASSEMBLY  


PROCEDURE

Hide 31477 1.INSTALL RELEASE CYLINDER BLEEDER PLUG

a.

Install the release cylinder bleeder plug to the release cylinder body.

Torque:
11 N*m (112 kgf*cm, 8 ft.*lbf)


b.

Install the bleeder plug cap to the release cylinder bleeder plug.


Hide 04313 2.INSTALL CLUTCH RELEASE CYLINDER KIT

a.
C128485

Coat a new piston with lithium soap base glycol grease as shown in the illustration.


b.

Install the piston and a new spring to the release cylinder body.

NOTICE:

Do not damage the inside of the release cylinder body.


HINT:

Install the maller end of the spring to the piston.



c.

Install a new boot to the push rod.


d.

Install the push rod together with the boot to the release cylinder body.