When the ECM receives a malfunction signal from the skid control ECU (brake actuator assembly), DTC P1750 is stored.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Memory |
|---|---|---|---|---|---|
| P1750 | Brake ECU Malfunction | 1. Diagnosis Condition 2. Malfunction Status 3. Malfunction Time 4. Other
1.
The vehicle speed is 20 km/h (12 mph) or more. 2.
The ECM receives a malfunction signal from the skid control ECU (brake actuator assembly). 3.
9 seconds 4.
1-trip detection logic |
Vehicle stability control system | Comes on | DTC stored |
Check for brake control system DTCs.
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTCs are output | B |
A
B