Home › Engine / Hybrid System › 2WW FUEL › FUEL SUPPLY PUMP › from 2015.10
RM3090E _51 Engine / Hybrid System _044374 2WW FUEL _0221820 FUEL SUPPLY PUMP G

2WW FUEL  FUEL SUPPLY PUMP  INSPECTION  


PROCEDURE

Hide 22100 1.INSPECT FUEL QUANTITY CONTROL VALVE

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.6 to 3.2 Ω


If the result is not as specified, replace the fuel quantity control valve.