Home › Engine / Hybrid System › 2WW FUEL › FUEL SENDER GAUGE ASSEMBLY › from 2015.10
RM3090E _51 Engine / Hybrid System _044374 2WW FUEL _0221827 FUEL SENDER GAUGE ASSEMBLY G

2WW FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

A362721C01
0.813,2.469 1.333,2.469 true 0.781,3.854 1.302,3.854 true 0.573,2.375 0.802,2.552 0.229,0.177 10 false *a 0.542,3.771 0.813,3.99 0.271,0.219 10 false *b 0.073,0.052 0.333,0.271 0.26,0.219 10 false *c
*a F (Upper)
*b E (Lower)
*c Component without harness connected
(Fuel Sender Gauge Assembly)


a.

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Float level is F (upper) 13.5 to 16.5 Ω
1 - 2 Float level is E (lower) 405.5 to 414.5 Ω


If the result is not as specified, replace the fuel sender gauge assembly.