Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Radio and Display Type) › from 2015.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0148247 NAVIGATION SYSTEM(for Radio and Display Type) C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  B15F6  Main Body ECU Vehicle Information Reading/Writing Process Malfunction  


DESCRIPTION

This DTC is stored when items controlled by the main body ECU (multiplex network body ECU) cannot be customized via the navigation system vehicle customization screen.

HINT:

The main body ECU (multiplex network body ECU) controls the items for the following systems that are customizable via the radio and display receiver assembly screen:

·

Power door lock control system

·

Wireless door lock control system (w/ Entry and Start System)

·

Wireless door lock control system (w/o Entry and Start System)

·

Lighting system (EXT)



DTC No. Detection Item DTC Detection Condition Trouble Area
B15F6 Main Body ECU Vehicle Information Reading/Writing Process Malfunction Main body ECU (multiplex network body ECU) vehicle setting processing error.
·

CAN communication system

·

Power door lock control system

·

Wireless door lock control system (w/ Entry and Start System)

·

Wireless door lock control system (w/o Entry and Start System)

·

Lighting system (EXT)

·

Main body ECU (multiplex network body ECU)

·

Radio and display receiver assembly



CAUTION / NOTICE / HINT

NOTICE:
·

Check that the wire harness is properly installed and does not have any sharp bends, pinching or loose connections.

Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING

·

When replacing the main body ECU (multiplex network body ECU), make sure to replace it with a new one.



PROCEDURE

1.CHECK CAN COMMUNICATION SYSTEM

Result:
Result Proceed to
OK A
NG (for LHD) B
NG (for RHD) C



A

2.CHECK POWER DOOR LOCK CONTROL SYSTEM

B

C

2.CHECK POWER DOOR LOCK CONTROL SYSTEM
a.

Check if the power door lock control system is malfunctioning.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the power door lock control system.


OK:

No malfunctions are present in the power door lock control system.



Result:
Proceed to
OK
NG



OK

3.CHECK LIGHTING SYSTEM (EXT)

NG

3.CHECK LIGHTING SYSTEM (EXT)
a.

Check if the lighting system (EXT) is malfunctioning.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the lighting system (EXT).


OK:

No malfunctions are present in the lighting system (EXT).



Result:
Result Proceed to
OK (w/ Entry and Start System) A
OK (w/o Entry and Start System) B
NG C



A

4.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)

B

6.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)

C

4.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Entry and Start System)
a.

Check if the wireless door lock control system (w/ Entry and Start System) is malfunctioning.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system (w/ Entry and Start System).


OK:

No malfunctions are present in the wireless door lock control system (w/ Entry and Start System).



Result:
Proceed to
OK
NG



OK

5.CHECK CUSTOMIZE ITEMS

NG

5.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle Customization" screen.


b.

Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

HINT:

These items shown as customizable via the radio and display receiver assembly vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.


i.

To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the power door lock control system related items that can be customized via the radio and display receiver assembly screen.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS


ii.

To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the wireless door lock control system (w/ Entry and Start System) related items that can be customized via the radio and display receiver assembly screen.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/ Entry and Start System)>CUSTOMIZE PARAMETERS


iii.

To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the lighting system (EXT) related items that can be customized via the radio and display receiver assembly screen.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS



c.

Using the GTS, confirm that it is possible to change the settings of the customize parameters that are available for customization via the radio and display receiver assembly screen.

OK:

The items available for customization via the radio and display receiver assembly screen can be customized successfully using the GTS.



Result:
Result Proceed to
OK A
NG (for LHD) B
NG (for RHD) C



A

REPLACE RADIO & DISPLAY RECEIVER ASSEMBLY

B

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

C

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

6.CHECK WIRELESS DOOR LOCK CONTROL SYSTEM (w/o Entry and Start System)
a.

Check if the wireless door lock control system (w/o Entry and Start System) is malfunctioning.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)>HOW TO PROCEED WITH TROUBLESHOOTING

HINT:

Customization may not be possible depending on the malfunction in the wireless door lock control system (w/o Entry and Start System).


OK:

No malfunctions are present in the wireless door lock control system (w/o Entry and Start System).



Result:
Proceed to
OK
NG



OK

7.CHECK CUSTOMIZE ITEMS

NG

7.CHECK CUSTOMIZE ITEMS
a.

Display the "Vehicle Customization" screen.


b.

Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

HINT:

These items shown as customizable via the radio and display receiver assembly vehicle customization screen can also be changed using the GTS. In a following step, the GTS will be used.


i.

To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the power door lock control system related items that can be customized via the radio and display receiver assembly screen.

Click hereVehicle Interior>DOOR LOCK>POWER DOOR LOCK CONTROL SYSTEM>CUSTOMIZE PARAMETERS


ii.

To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the wireless door lock control system (w/o Entry and Start System) related items that can be customized via the radio and display receiver assembly screen.

Click hereVehicle Interior>DOOR LOCK>WIRELESS DOOR LOCK CONTROL SYSTEM(w/o Entry and Start System)>CUSTOMIZE PARAMETERS


iii.

To match-up the items in the radio and display receiver assembly with the items on the GTS, check the customize parameters list for the lighting system (EXT) related items that can be customized via the radio and display receiver assembly screen.

Click hereVehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>CUSTOMIZE PARAMETERS



c.

Using the GTS, confirm that it is possible to change the settings of the customize parameters that are available for customization via the radio and display receiver assembly screen.

OK:

The items available for customization via the radio and display receiver assembly screen can be customized successfully using the GTS.



Result:
Result Proceed to
OK A
NG (for LHD) B
NG (for RHD) C



A

REPLACE RADIO & DISPLAY RECEIVER ASSEMBLY

B

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

C

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)