These DTCs are stored when a malfunction occurs in the navigation ECU.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B1552 | Extension Module Malfunction | Internal malfunction of the navigation ECU | Navigation ECU |
| B158A | Extension Module Noise Adjustment Malfunction | Screen noise adjustment fails | Navigation ECU |
| B15B7 | Bluetooth Module Malfunction | Bluetooth Module Malfunction | Navigation ECU |
Check that the wire harness is properly installed and does not have any sharp bends, pinching or loose connections.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
Clear the DTCs.
Check for DTCs.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG