Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM(for Radio and Display Type) › from 2015.10
RM3090E _56 Audio / Visual / Telematics _008776 NAVIGATION / MULTI INFO DISPLAY _0148247 NAVIGATION SYSTEM(for Radio and Display Type) J

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM(for Radio and Display Type)  CD Sound Skips  


PROCEDURE

1.CHECK DISC
a.
I100152

Check that the disc is not deformed or cracked.

OK:

No deformation or cracks on the disc



Result:
Proceed to
OK
NG



OK

2.CHECK DISC

NG

CHANGE DISC

2.CHECK DISC
a.
I100151

Disc cleaning

i.

If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

OK:

Malfunction disappears.


NOTICE:

Do not use a conventional record cleaner or antistatic preservative.




Result:
Proceed to
OK
NG



OK

END (DISC IS DIRTY)

NG

3.REPLACE DISC WITH ANOTHER AND RECHECK
3.REPLACE DISC WITH ANOTHER AND RECHECK
a.

Replace the disc with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (DISC IS DEFECTIVE)

NG

4.CHECK RADIO & DISPLAY RECEIVER ASSEMBLY
4.CHECK RADIO & DISPLAY RECEIVER ASSEMBLY
a.

Check that the radio and display receiver assembly is properly installed.

OK:

Radio and display receiver assembly is properly installed.



Result:
Proceed to
OK
NG



OK

REPLACE RADIO & DISPLAY RECEIVER ASSEMBLY

NG

REINSTALL RADIO & DISPLAY RECEIVER ASSEMBLY