Home › Engine / Hybrid System › 2AD-FHV COOLING › COOLING FAN MOTOR › from 2015.10
RM3090E _51 Engine / Hybrid System _008738 2AD-FHV COOLING _0050224 COOLING FAN MOTOR A

2AD-FHV COOLING  COOLING FAN MOTOR  REMOVAL  


PROCEDURE

Hide 16400 1.REMOVE RADIATOR ASSEMBLY

Hide 16361 2.REMOVE FAN AND NO. 2 FAN (w/ Towing Package)

a.
A362593

Remove the 2 nuts, fan and No. 2 fan.


Hide 16361 3.REMOVE FAN AND NO. 2 FAN (w/o Towing Package)

a.
A208243

Remove the 2 nuts, fan and No. 2 fan.


Hide 4.REMOVE COOLING FAN ECU (w/ Towing Package)

a.
A362595

Detach the 3 clamps and disconnect the cooling fan motor connector.


b.
A362592

Detach the 3 clamps and disconnect the No. 2 cooling fan motor connector.


c.
A362596

Remove the 4 screws and 2 cooling fan ECU.


Hide 16363 5.REMOVE COOLING FAN MOTOR (w/ Towing Package)

a.
A362594

Remove the 3 screws and cooling fan motor.


Hide 16363 6.REMOVE COOLING FAN MOTOR (w/o Towing Package)

a.
A208245

Remove the 3 screws and cooling fan motor.


Hide 16363A 7.REMOVE NO. 2 COOLING FAN MOTOR (w/ Towing Package)

a.
A362597

Remove the 3 screws and remove the No. 2 cooling fan motor.


Hide 16363A 8.REMOVE NO. 2 COOLING FAN MOTOR (w/o Towing Package)

a.
A208247

Detach the 3 harness clamps from the fan shroud.


b.
A208246

Remove the 3 screws and remove the No. 2 cooling fan motor.