Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR SYSTEM › from 2015.10
RM3090E _59 Vehicle Exterior _008794 DOOR / HATCH _0050374 POWER BACK DOOR SYSTEM D

DOOR / HATCH  POWER BACK DOOR SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


a.

Whenever a DTC is detected, the multiplex network door ECU stores the current vehicle state as Freeze Frame Data.



CHECK FREEZE FRAME DATA


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch ON.


d.

Turn the GTS on.


e.

Enter the following menus: Body Electrical / Back Door / Trouble Codes.

Body Electrical > Back Door > Trouble Codes
50001 159
Body Electrical > Back Door
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Half Latch SW Latch switch signal ON or OFF ON: Back door lock motor open-latched
OFF: Back door lock motor full-latched or half-latched
Refer to "POWER BACK DOOR OPERATION TIMING CHART"*
Closer Position SW Sector switch signal ON or OFF ON: Back door lock sector gear in center position (Sector switch on)
OFF: Back door lock sector gear out of center position (Sector switch off)
Refer to "POWER BACK DOOR OPERATION TIMING CHART"*
Pawl Position Switch Pawl switch signal ON or OFF ON: Back door lock motor open-latched
OFF: Back door lock motor except open-latched
Refer to "POWER BACK DOOR OPERATION TIMING CHART"*
Courtesy SW Back door courtesy switch signal ON or OFF ON: Back door open
OFF: Back door closed
Refer to "POWER BACK DOOR OPERATION TIMING CHART"*

*: Refer to "POWER BACK DOOR OPERATION TIMING CHART"

Click hereVehicle Exterior>DOOR / HATCH>POWER BACK DOOR SYSTEM>SYSTEM DESCRIPTION




CLEAR FREEZE FRAME DATA


NOTICE:

Clearing the DTCs will also clear the Freeze Frame Data.


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch ON.


d.

Turn the GTS on.


e.

Clear the DTCs and Freeze Frame Data.

Body Electrical > Back Door > Clear DTCs
50002 159