Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › from 2015.10
RM3090E _58 Vehicle Interior _008784 METER / GAUGE / DISPLAY _0050254 METER / GAUGE SYSTEM D

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  OPERATION CHECK  


INSPECT INDICATOR/WARNING LIGHT


a.

Check the following indicators and warning lights.

Indicator/Warning Light Switch Condition Specified Condition
Headlight beam level control system indicator light*6*9 Ignition switch off → ON Comes on for 3 seconds
LED headlight indicator light*6*10
Brake warning light
Engine coolant temperature warning light*6
Oil level indicator light*6*11
Sedimenter warning light*6*11
DPF warning light*6*11
Stop and start indicator light*8
Stop and start cancel indicator light*8
Slip indicator light
VSC OFF indicator light
TRAC OFF indicator light*1*6
ABS warning light
Tire pressure warning light*2
Eco driving indicator light
Master caution warning light*5
MAINT REQD indicator light*6
AUTO LSD indicator light
Downhill assist control indicator light*7
Automatic High Beam indicator light*4
AWD warning light*1*6 Ignition switch off → ON Comes on for 4 seconds
AWD lock indicator light*1
SRS warning light Ignition switch off → ON Comes on for 6 seconds
Charge warning light*6 Ignition switch off → ON
·

Illuminates when ignition switch turned ON

·

Turns off when engine started


Shift up indicator light*3*6
Shift down indicator light*3*6
Engine oil pressure warning light*6
A/T OIL TEMP warning light*6
EPS warning light
MIL

*1: for 4WD/AWD

*2: w/ Tire Pressure Warning System

*3: for Manual Transaxle

*4: w/ Automatic High Beam System

*5: for TFT Display type

*6: for Segment Display type

*7: w/ Downhill Assist Control System

*8: w/ Stop and Start System

*9: w/ Automatic Headlight Beam Level Control System

*10: w/ LED Headlight

*11: Engine Type Diesel




INSPECT SPEEDOMETER


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / ABS/VSC/TRC / Data List.

Chassis > ABS/VSC/TRC > Data List
Tester Display
Vehicle Speed
50003 105 42
for Australia
Standard Indication Acceptable Range

*: for TFT Type

20 km/h 20.3 to 24.3 km/h
40 km/h 40.6 to 45.1 km/h
60 km/h 60.9 to 65.4 km/h
80 km/h 81.2 to 86.2 km/h
100 km/h 101.5 to 105.5 km/h
120 km/h 121.8 to 126.8 km/h
140 km/h 142.1 to 147.1 km/h
160 km/h 162.4 to 167.4 km/h
180 km/h 182.7 to 187.7 km/h
200 km/h 203 to 208 km/h
220 km/h 223.3 to 228.3 km/h
240 km/h* 243.6 to 248.6 km/h
260 km/h* 263.9 to 268.9 km/h

except Australia (km/h)
Standard Indication Acceptable Range

*: for TFT Type

20 km/h 21 to 25 km/h
40 km/h 41.7 to 46.2 km/h
60 km/h 62.7 to 67.2 km/h
80 km/h 83.4 to 88.4 km/h
100 km/h 104.3 to 109.3 km/h
120 km/h 125.1 to 130.6 km/h
140 km/h 145.8 to 151.8 km/h
160 km/h 166.2 to 173.2 km/h
180 km/h 186.9 to 194.5 km/h
200 km/h 207.7 to 215.7 km/h
220 km/h 228.4 to 236.8 km/h
240 km/h* 245.2 to 250.2 km/h
260 km/h* 270 to 279.2 km/h

except Australia (MPH)
Standard Indication Acceptable Range
20 MPH 21 to 23.5 MPH
40 MPH 42 to 44.5 MPH
60 MPH 62.5 to 66 MPH
80 MPH 83.1 to 87.1 MPH
100 MPH 103.9 to 108.4 MPH
120 MPH 124.7 to 129.6 MPH
140 MPH 145.4 to 150.7 MPH
160 MPH 166.2 to 161.9 MPH
180 MPH 187 to 193 MPH

If the result is not as specified, the speedometer may have a malfunction.

NOTICE:

Do not use worn, underinflated or overinflated tires as the speedometer reading will be inaccurate.



e.

Check the deflection width of the speedometer indicator.

Reference:

Within 0.3°




INSPECT TACHOMETER


a.

Connect a tune-up tachometer and start the engine.


b.

Compare the test results with the tachometer indicator.

DC 13.5 V at 25°C (77°F)
Standard Indication (rpm) Acceptable Range
Data in ( ) is for Reference
700 670 to 810
1000 (957 to 1157)
2000 (1964 to 2264)
3000 2971 to 3371
4000 (4028 to 4428)
5000 5085 to 5485
6000 (6091 to 6591)
7000 7098 to 7698
8000 (8155 to 8755)

If the result is not as specified, the tachometer may have a malfunction.



INSPECT METER/GAUGE


a.

Connect the GTS to the DLC3.


b.

Perform the Active Test (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST).

OK:

Each meter/gauge needle indication is normal.




INSPECT WARNING/INDICATOR LIGHT


a.

Connect the GTS to the DLC3.


b.

Perform the Active Test (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST).

OK:

Each warning/indicator light can be turned on and off using the GTS.




INSPECT MULTI-INFORMATION DISPLAY


a.

Connect the GTS to the DLC3.


b.

Perform the Active Test (See page Vehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>DATA LIST / ACTIVE TEST).

OK:

All dots in the multi-information display can be turned on and off using the GTS.