Home › Drivetrain › K111F MULTIDRIVE / CVT › CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM › from 2015.10
RM3090E _52 Drivetrain _009408 K111F MULTIDRIVE / CVT _0051011 CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM C

K111F MULTIDRIVE / CVT  CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM  P1750  Brake ECU Malfunction  


DESCRIPTION

When the ECM receives an error signal from the skid control ECU (brake actuator assembly), P1750 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P1750 Brake ECU Malfunction 1. Diagnosis Condition 2. Malfunction Status 3. Malfunction Time 4. Other
1.

-

2.

The ECM receives an error signal from the skid control ECU (brake actuator assembly).

3.

3 seconds

4.

1 trip detection logic


·

Vehicle stability control system

·

Anti-lock brake system


Comes on DTC stored

PROCEDURE

1.CHECK DTC OUTPUT (BRAKE CONTROL SYSTEM)
a.

Check for DTCs of the brake control system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DTC CHECK / CLEAR

Result:
Proceed to
DTCs are not output
DTCs are output




DTCs are not output

DTCs are output