Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › from 2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0047053 LIGHTING SYSTEM U

LIGHTING (EXT)  LIGHTING SYSTEM  TERMINALS OF ECU  


CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY, MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


C278789N02
0.479,5.302 0.896,5.583 0.417,0.281 2.542,5.208 2.958,5.49 0.417,0.281 5.615,5.229 6.031,5.51 0.417,0.281 1.781,6.969 2.198,7.25 0.417,0.281 5.448,7.042 5.865,7.323 0.417,0.281 2.333,1.229 2.615,1.427 0.281,0.198 10 3B 3.01,0.938 3.292,1.135 0.281,0.198 10 3E 3.656,1.083 3.938,1.281 0.281,0.198 10 3C 4.344,1.208 4.625,1.406 0.281,0.198 10 3D 2.271,2.969 2.552,3.167 0.281,0.198 10 3A 0.604,5.365 0.885,5.563 0.281,0.198 10 3A 2.677,5.271 2.958,5.469 0.281,0.198 10 3B 5.729,5.292 6.01,5.49 0.281,0.198 10 3C 1.917,7.031 2.198,7.229 0.281,0.198 10 3D 5.573,7.104 5.854,7.302 0.281,0.198 10 3E

C278790C04
1.333,3.667 1.75,3.896 0.417,0.229 2.531,5.563 2.948,5.792 0.417,0.229 3.333,7.438 3.75,7.667 0.417,0.229 1.365,7.458 1.781,7.688 0.417,0.229 1.25,5.25 1.417,5.25 1.417,5.25 1.667,4.833 false 1.083,7.25 1.333,7.25 1.333,7.25 1.583,7 false 2.667,1.656 2.823,1.854 0.156,0.198 10 A 1.5,3.698 1.656,3.896 0.156,0.198 10 A 0.313,4.281 0.563,4.458 0.25,0.177 10 *A 1.083,5.167 1.333,5.344 0.25,0.177 10 *1 2.615,5.594 3.052,5.76 0.438,0.167 10 G78 3.406,7.469 3.865,7.635 0.458,0.167 10 G78 1.427,7.49 1.781,7.667 0.354,0.177 10 G79 0.917,7.167 1.167,7.344 0.25,0.177 10 *1 0.281,6.646 0.531,6.823 0.25,0.177 10 *B
*A Main Body ECU (Multiplex Network Body ECU) with 1 connector *B Main Body ECU (Multiplex Network Body ECU) with 3 connectors
*1 Main Body ECU (Multiplex Network Body ECU) - -


a.

Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.

for LHD:

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU(for LHD)>REMOVAL

for RHD:

Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU(for RHD)>REMOVAL


b.

Connect the instrument panel junction block assembly connectors.


c.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: w/o Stop and Start System

*2: w/ Stop and Start System

A-32 (IG) - Body ground - Ignition power supply Ignition switch ON 11 to 14 V*1
10.5 to 14 V*2
Ignition switch off Below 1 V
A-30 (BECU) - Body ground - Battery power supply Always 11 to 14 V
A-29 (ACC) - Body ground - ACC power supply Ignition switch ACC 11 to 14 V
Ignition switch off Below 1 V
A-11 (GND1) - Body ground - Ground Always Below 1 Ω

If the result is not as specified, there may be a malfunction in the wire harness or instrument panel junction block assembly.



e.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: w/ Rear Fog Light

*2: for RHD

*3: w/ Automatic Light Control System

*4: w/ Front Fog Light

*5: w/ Daytime Running Light

*6: for LHD

*7: w/ Front Power Seat Control System (w/ Memory)

*8: w/ Front Power Seat Control System (w/o Memory)

*9: Main Body ECU (multiplex network body ECU) with 3 Connectors

*10: Main Body ECU (multiplex network body ECU) with 1 Connector

G78-1 (RFOG) - Body ground*1 L - Body ground Rear fog light switch input Rear fog light switch on Below 1 V
Rear fog light switch off 11 to 14 V
G78-5 (HU) - Body ground Y - Body ground Headlight dimmer switch high signal input Headlight dimmer switch in high position Below 1 V
Headlight dimmer switch in low position Pulse generation*9
11 to 14 V*10
G78-8 (HF) - Body ground R - Body ground Headlight dimmer switch high flash signal input Headlight dimmer switch in high flash position Below 1 V
Headlight dimmer switch not in high flash position 11 to 14 V
G78-19 (FRCY) - Body ground*2 L - Body ground Front door courtesy light switch RH signal Front door RH open Below 1 V
Front door RH closed Pulse generation
G78-20 (CLTB) - G78-22 (CLTE)*3 W - V Automatic light control sensor power supply output Ignition switch off Below 1 V
Ignition switch ON and headlight dimmer switch in AUTO position 11 to 14 V
G78-21 (CLTS) - Body ground*3 G - Body ground Automatic light control sensor signal input Ignition switch off Below 1 V
Ignition switch ON
Headlight dimmer switch in AUTO position
Automatic light control sensor covered with a hand → Automatic light control sensor exposed to ambient light
Pulse generation (See waveform 1)
G78-27 (FFOG) - Body ground*4 GR - Body ground Front fog light switch input Front fog light switch on Below 1 V
Front fog light switch off Pulse generation*9
11 to 14 V*10
G78-28 (A) - Body ground*3 G - Body ground Headlight dimmer switch AUTO signal input Headlight dimmer switch in AUTO position Below 1 V
Headlight dimmer switch not in AUTO position Pulse generation*9
11 to 14 V*10
G78-29 (HEAD) - Body ground L - Body ground Headlight dimmer switch head signal input Headlight dimmer switch in head position Below 1 V
Headlight dimmer switch not in head position 11 to 14 V
G78-30 (TAIL) - Body ground W - Body ground Headlight dimmer switch tail signal input Headlight dimmer switch in tail or head position Below 1 V
Headlight dimmer switch in neither tail nor head position 11 to 14 V
G79-21 (RLEW) - Body ground SB - Body ground Light control signal input Ignition switch ON
Headlight dimmer switch not in head position
Pulse generation
Ignition switch ON
Headlight dimmer switch off
11 to 14 V
G79-24 (LLEW) - Body ground L - Body ground Light control signal input Ignition switch ON
Headlight dimmer switch not in head position
Pulse generation
Ignition switch ON
Headlight dimmer switch off
11 to 14 V
3B-37 (HRLY) - Body ground BR - Body ground H-LP relay drive output Headlight dimmer switch in head position Below 1 V
Headlight dimmer switch not in head position 11 to 14 V
3B-52 (DRLE) - Body ground*5, *7 B - Body ground DRL relay drive output Daytime running light on Below 1 V
Daytime running light off 11 to 14 V
3D-10 (DRLE) - Body ground*5, *8 B - Body ground DRL relay drive output Daytime running light on Below 1 V
Daytime running light off 11 to 14 V
3B-54 (DIM) - Body ground LG - Body ground Running light relay drive output Headlight dimmer switch in high or high flash position Below 1 V
Headlight dimmer switch not in high or high flash position 11 to 14 V
3B-56 (FFGO) - Body ground*4 W - Body ground Front fog light signal output Headlight dimmer switch in tail position and front fog light switch on Below 1 V
Front fog light switch off 11 to 14 V
3D-34 (PKB) - Body ground*5 B - Body ground Parking brake switch input Parking brake switch on Below 1 V
Parking brake switch off 11 to 14 V
3D-52 (RFGO) - Body ground*1 W - Body ground Rear fog light signal output Headlight dimmer switch in tail position and rear fog light switch on Below 1 V
Rear fog light switch off 11 to 14 V
3E-40 (FLCY) - Body ground*6 W - Body ground Front door courtesy light switch LH signal Front door LH open Below 1 V
Front door LH closed Pulse generation

i.
B113714E01
2.948,1.063 3.292,1.219 0.344,0.156 10 GND 1.844,1.177 1.969,1.333 0.125,0.156 10 A

Waveform 1

Item Content
Terminal No. (Symbol) G78-21 (CLTS) - Body ground
Tool setting 5 V/DIV., 5 ms./DIV.
Condition Ignition switch ON
Headlight dimmer switch in AUTO position
Automatic light control sensor covered with a hand → Automatic light control sensor exposed to ambient light

HINT:

If the ambient light becomes brighter, width A becomes narrower.





CHECK COMBINATION METER ASSEMBLY


E235640N04
2.063,0.188 2.49,0.427 0.427,0.24 5.583,0.26 6.01,0.5 0.427,0.24 2.146,0.229 2.604,0.427 0.458,0.198 10 G16 5.646,0.302 6.104,0.5 0.458,0.198 10 G17

a.

Disconnect the G16 and G17 combination meter connectors.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition

*1: w/o Stop and Start System

*2: w/ Stop and Start System

G16-21 (ET) - Body ground BR - Body ground Ground Always Below 1 Ω
G16-39 (IG+) - Body ground B - Body ground*1
P - Body ground*2
Ignition power supply Ignition switch off Below 1 V
Ignition switch ON 11 to 14 V
G16-40 (B) - Body ground Y - Body ground Battery power supply Always 11 to 14 V
G17-1 (B) - Body ground L - Body ground Battery power supply Always 11 to 14 V


c.

Reconnect the G16 and G17 combination meter connectors.


d.

Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G16-29 (HAZ) - Body ground BE - Body ground Headlight dimmer switch (turn signal switch) left or right turn position signal input Ignition switch ON
Headlight dimmer switch (turn signal switch) off
11 to 14 V
Ignition switch ON
Headlight dimmer switch (turn signal switch) in left or right turn position
Below 1 V
G17-3 (HAZ) - Body ground GR - Body ground Hazard warning signal switch signal input Hazard warning signal switch off 11 to 14 V
Hazard warning signal switch on Below 1 V
G17-9 (ER) - Body ground SB - Body ground Headlight dimmer switch (turn signal switch) right turn position signal input Ignition switch ON
Headlight dimmer switch (turn signal switch) off
11 to 14 V
Ignition switch ON
Headlight dimmer switch (turn signal switch) in right turn position
Below 1 V
G17-10 (EL) - Body ground LG - Body ground Headlight dimmer switch (turn signal switch) left turn position signal input Ignition switch ON
Headlight dimmer switch (turn signal switch) off
Below 1 V
Ignition switch ON
Headlight dimmer switch (turn signal switch) in right turn position
Below 1 V ←→ 11 to 14 V
G17-7 (LR) - Body ground L - Body ground RH turn signal light signal output Ignition switch ON
RH turn signal light off
Below 1 V
Ignition switch ON
RH turn signal light blinking
Below 1 V ←→ 11 to 14 V
G17-13 (LL) - Body ground Y - Body ground LH turn signal light signal output Ignition switch ON
LH turn signal light off
Below 1 V
Ignition switch ON
LH turn signal light blinking
Below 1 V ←→ 11 to 14 V