Home › Vehicle Interior › SEAT › REAR SEAT ASSEMBLY(for RH Side) › from 2015.10
RM3090E _58 Vehicle Interior _008433 SEAT _0049738 REAR SEAT ASSEMBLY(for RH Side) A

SEAT  REAR SEAT ASSEMBLY(for RH Side)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the seatback frame, seat cushion frame and reclining adjuster may injure your hands.


PROCEDURE

Hide 79955A 1.REMOVE REAR SEAT FRONT BRACKET COVER RH

a.
B336599

Using a screwdriver, detach the 4 claws.

HINT:

Tape the screwdriver tip before use.



b.

Detach the 2 guides and remove the rear seat front bracket cover RH in the direction shown by the arrow in the illustration.


Hide 79965 2.REMOVE REAR SEAT NO. 2 LEG SIDE COVER

a.
B336598

Using a screwdriver, detach the 4 claws to remove the rear seat No. 2 leg side cover.

HINT:

Tape the screwdriver tip before use.



Hide 3.REMOVE REAR SEAT ASSEMBLY RH

a.
B336603

Remove the 2 bolts on the front side of the seat.


b.
B429033

w/ Seat Heater System:

i.

Disconnect the connector.


ii.

Detach the wire harness clamp.



c.
B336606C01
1.021,1.115 0.865,0.802 0.865,0.802 0.625,0.802 false 0.479,0.74 0.792,0.938 0.313,0.198 10 *1
*1 Rubber Band


w/ Seat Belt Warning System:

Disconnect the 2 connectors.


d.

Pass the rear seat center lap type belt assembly RH through the rubber band of the separate type rear seat cushion cover.


e.

Remove the 3 bolts on the rear side of the seat.


f.

Fully tilt the seatback forward. Then remove the seat.

NOTICE:

Be careful not to damage the vehicle body.



Hide 79915 4.REMOVE SEAT LEG BRACKET

B336604

a.

Detach the clamp and remove the 4 bolts.


b.

Detach the guide to remove the seat leg bracket.