87510Q
1.INSPECT REAR SEAT CUSHION HEATER ASSEMBLY RH
| *1 | Connector A |
| *2 | Connector B |
| *a | Component without harness connected
(Rear Seat Cushion Heater Assembly RH) |
Check the rear seat cushion heater assembly RH.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A1 (B) - A2 (E) | Seat cushion heater temperature 20°C (68°F) | 3.28 to 3.92 Ω |
| A1 (B) - B1 | Below 1 Ω | |
| A1 (B) - B2 | 3.28 to 3.92 Ω | |
| A2 (E) - B1 | 3.21 to 3.85 Ω |
If the result is not as specified, replace the rear seat cushion heater assembly RH.