| Drive plate runout
|
Maximum
|
0.30 mm (0.0118 in.)
|
| CVT type T oil seal LH
|
Standard depth
|
-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
|
| CVT type T oil seal RH (INNER)
|
Standard depth
|
-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
|
| CVT type T oil seal RH (OUTER)
|
Standard depth
|
4.5 to 5.5 mm (0.178 to 0.216 in.)
|
| Transmission revolution sensor (NIN)
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 1 (NIN-) - 2 (NIN+)
|
20°C (68°F)
|
560 to 680 Ω
|
| Transmission revolution sensor (NOUT)
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 1 (NOTO) - 2 (NOTB)
|
Low Signal
|
4 to 8 mA
|
| High Signal
|
12 to 16 mA
|
| Transmission revolution sensor (NT)
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 1 (NTO) - 2 (NTB)
|
Low Signal
|
4 to 8 mA
|
| High Signal
|
12 to 16 mA
|
| Park/neutral position switch assembly
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 1 (RB) - 3 (PL)
|
Shift lever in P
|
Below 1 Ω
|
| 4 (B) - 9 (L)
|
Shift lever in P
|
Below 1 Ω
|
| 1 (RB) - 2 (RL)
|
Shift lever in R
|
Below 1 Ω
|
| 1 (RB) - 8 (NL)
|
Shift lever in N
|
Below 1 Ω
|
| 4 (B) - 9 (L)
|
Shift lever in N
|
Below 1 Ω
|
| 1 (RB) - 7 (DL)
|
Shift lever in D, M, "+" or "-"
|
Below 1 Ω
|
| 1 (RB) - 3 (PL)
|
Shift lever not in P
|
10 kΩ or higher
|
| 4 (B) - 9 (L)
|
Shift lever not in P
|
10 kΩ or higher
|
| 1 (RB) - 2 (RL)
|
Shift lever not in R
|
10 kΩ or higher
|
| 1 (RB) - 8 (NL)
|
Shift lever not in N
|
10 kΩ or higher
|
| 4 (B) - 9 (L)
|
Shift lever not in N
|
10 kΩ or higher
|
| 1 (RB) - 7 (DL)
|
Shift lever not in D, M, "+" or "-"
|
10 kΩ or higher
|
| Shift lever assembly (w/ Smart Key System)
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 1 (ACC) - Body ground
|
Engine switch on (IG)
|
11 to 14 V
|
| Engine switch on (ACC)
|
11 to 14 V
|
| Engine switch off
|
Below 1 V
|
| 8 (STP) - Body ground
|
Brake pedal depressed
|
11 to 14 V
|
| Brake pedal released
|
Below 1 V
|
| 2 (P2) - Body ground
|
Engine switch on (ACC) and shift lever in except P
|
Below 1 V
|
| Engine switch on (ACC) and shift lever in P
|
11 to 14 V
|
| 4 (IG) - Body ground
|
Engine switch on (IG)
|
11 to 14 V
|
| Engine switch off
|
Below 1 V
|
| 7 (E) - Body ground
|
Always
|
Below 1 Ω
|
| Shift lever assembly (w/o Smart Key System)
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 1 (ACC) - Body ground
|
Ignition switch ON
|
11 to 14 V
|
| Ignition switch ACC
|
11 to 14 V
|
| Ignition switch off
|
Below 1 V
|
| 8 (STP) - Body ground
|
Brake pedal depressed
|
11 to 14 V
|
| Brake pedal released
|
Below 1 V
|
| 5 (KLS+) - Body ground
|
Ignition switch ACC and shift lever in P
|
Below 1 V
|
| Ignition switch ACC and shift lever except in P
|
11 to 14 V
|
| 4 (IG) - Body ground
|
Ignition switch ON
|
11 to 14 V
|
| Ignition switch off
|
Below 1 V
|
| 7 (E) - Body ground
|
Always
|
Below 1 Ω
|
| Transmission control switch
|
| for LHD:
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 4 (IG) - 5 (S)
|
Shift lever in M, "+" or "-"
|
Below 1 Ω
|
| 3 (SFTU) - 2 (E)
|
Shift lever held in "+" (Up-shift)
|
Below 1 Ω
|
| 1 (SFTD) - 2 (E)
|
Shift lever held in "-" (Down-shift)
|
Below 1 Ω
|
| 4 (IG) - 5 (S)
|
Shift lever not in M, "+" or "-"
|
10 kΩ or higher
|
| 3 (SFTU) - 2 (E)
|
Shift lever in M
|
10 kΩ or higher
|
| 1 (SFTD) - 2 (E)
|
Shift lever in M
|
10 kΩ or higher
|
| for RHD:
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 4 (IG) - 5 (S)
|
Shift lever in M, "+" or "-"
|
Below 1 Ω
|
| 1 (SFTU) - 2 (E)
|
Shift lever held in "+" (Up-shift)
|
Below 1 Ω
|
| 3 (SFTD) - 2 (E)
|
Shift lever held in "-" (Down-shift)
|
Below 1 Ω
|
| 4 (IG) - 5 (S)
|
Shift lever not in M, "+" or "-"
|
10 kΩ or higher
|
| 1 (SFTU) - 2 (E)
|
Shift lever in M
|
10 kΩ or higher
|
| 3 (SFTD) - 2 (E)
|
Shift lever in M
|
10 kΩ or higher
|
| Combination switch
|
| Tester Connection
|
Condition
|
Specified Condition
|
| 2 (MSW1) - 4 (MSW2)
|
Combination switch (SPORT) on
|
Below 1 Ω
|
| 2 (MSW1) - 4 (MSW2)
|
Combination switch (SPORT) off
|
10 kΩ or higher
|
| Transmission shift switch assembly
|
| for LH:
|
| Tester Connection
|
Condition
|
Specified Condition
|
| SFTD - ECC
|
"-" shift paddle operated and held (down-shift)
|
Below 2.5 Ω
|
| SFTD - ECC1
|
"-" shift paddle operated and held (down-shift)
|
Below 2.5 Ω
|
| SFTD - ECC
|
"-" shift paddle not operated (down-shift)
|
1 MΩ or higher
|
| SFTD - ECC1
|
"-" shift paddle not operated (down-shift)
|
1 MΩ or higher
|
| for RH:
|
| SFTU - ECC
|
"+" shift paddle operated and held (up-shift)
|
Below 2.5 Ω
|
| SFTU - ECC
|
"+" shift paddle not operated (upshift)
|
1 MΩ or higher
|
| No. 1 switch wire
|
|
| Tester Connection
|
Condition
|
Specified Condition
|
| SFTD - ECC
|
"-" shift paddle operated and held (down-shift)
|
Below 2.5 Ω
|
| SFTU - ECC
|
"+" shift paddle operated and held (up-shift)
|
Below 2.5 Ω
|
| SFTD - ECC
|
"-" shift paddle not operated (down-shift)
|
1 MΩ or higher
|
| SFTU - ECC
|
"+" shift paddle not operated (upshift)
|
1 MΩ or higher
|