Home › Engine / Hybrid System › CRUISE CONTROL › SPEED LIMITER SYSTEM › from 2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0226926 SPEED LIMITER SYSTEM D

CRUISE CONTROL  SPEED LIMITER SYSTEM  FREEZE FRAME DATA  


HINT:

This procedure applies to the 2WW engine.


CHECK FREEZE FRAME DATA


HINT:

The ECU data indicating the vehicle status is stored in the ECU as a freeze frame data simultaneously as the DTC is stored.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

Powertrain > Engine and ECT > Trouble Codes
50001 371

e.

From the DTC screen, select the DTC (snow icon displayed) to which freeze frame data is recorded.



LIST OF FREEZE FRAME DATA


Powertrain > Engine and ECT
Tester Display Measurement Item Range Normal Condition Diagnostic Note
ASL Switch Speed limiter switch signal ON or OFF ON: Speed limiter switch on
OFF: Speed limiter switch off
-
Vehicle Speed Used for CCS and ASL Computation Vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (159 mph) Actual vehicle speed displayed -
Speed Limit Stored by ASL Vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (159 mph) Vehicle speed stored in memory -
Accelerator Pedal Angle for Speed Limiter Accelerator pedal angle Min.: 0 %, Max.: 100 % Accelerator pedal angle displayed -
ASL Main SW Speed limiter switch signal ON or OFF ON: Speed limiter switch on
OFF: Speed limiter switch off
-