Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE › from 2015.10
RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050090 WASHER NOZZLE A

WIPER / WASHER  WASHER NOZZLE  REMOVAL  


PROCEDURE

Hide 85035 1.REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/o Heater)

HINT:

Use the same procedure for both washer nozzle sub-assemblies.


a.
E268402C02
1.302,1.281 1.76,1.479 0.458,0.198 10 false (1) 1.781,1.094 2.24,1.292 0.458,0.198 10 false (2)
V100155

Protective Tape


Using a screwdriver, detach the 2 claws and remove the washer nozzle sub-assembly as shown in the illustration.

NOTICE:

Be careful not to damage the windshield.


HINT:

Tape the screwdriver tip before use.



b.
E268403

Disconnect the washer nozzle sub-assembly from the washer hose.

NOTICE:

Washer nozzle sub-assemblies cannot be reused.



Hide 53341B 2.REMOVE HOOD INSULATOR (w/ Heater)

Hide 85035 3.REMOVE WASHER NOZZLE SUB-ASSEMBLY (w/ Heater)

HINT:

Use the same procedure for both washer nozzle sub-assemblies.


a.
B427827C01
0.031,0.063 0.344,0.219 0.313,0.156 10 true *A 0.031,2.323 0.344,2.479 0.313,0.156 10 true *B
*A for LH Side
*B for RH Side
V100135

Washer Hose
V100136

Connector


Disconnect the connector and washer hose.


b.

Detach the clamp.


c.
B427697C01
2.313,1.167 2.771,1.365 0.458,0.198 10 false (1) 1.417,1 1.875,1.198 0.458,0.198 10 false (2)
V100155

Protective Tape


Using a clip remover, detach the 2 claws and remove the washer nozzle sub-assembly as shown in the illustration.

NOTICE:
·

Be careful not to damage the windshield.

·

Washer nozzle sub-assemblies cannot be reused.



HINT:

Tape the clip remover tip before use.