Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE › from 2015.10
RM3090E _59 Vehicle Exterior _008795 WIPER / WASHER _0050090 WASHER NOZZLE G

WIPER / WASHER  WASHER NOZZLE  INSPECTION  


PROCEDURE

Hide 85035 1.INSPECT WASHER NOZZLE SUB-ASSEMBLY (w/ Heater)

a.
E327717C01
0.625,0.344 0.938,0.5 0.313,0.156 10 false *a
*a Component without harness connected (Washer Nozzle Sub-Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 2.2 Ω


If the result is not as specified, replace the washer nozzle sub-assembly.