Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2015.10–2016.08
RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050105 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REMOVAL  


PROCEDURE

Hide 76626E 1.REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

a.
B335666C03
2.042,1.969 2.521,1.969 false 2.146,1.552 2.625,1.552 false 0.448,0.917 0.802,0.917 true 0.573,0.917 0.573,1.333 0.573,1.333 0.833,1.333 true 0.573,1.146 0.813,1.146 true 0.26,0.833 0.573,0.99 0.313,0.156 10 false *a 2.563,1.875 2.875,2.031 0.313,0.156 10 false *b 2.656,1.479 2.969,1.635 0.313,0.156 10 false *b
*a Screw A
*b Screw B


Remove the 2 screws labeled B.


b.

Remove the 3 screws labeled A and rear quarter panel mudguard LH.


Hide 76625G 2.REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

HINT:

Use the same procedure described for the LH side.


Hide 52159 3.REMOVE REAR BUMPER COVER

a.
B426422

Remove the 6 clips.


b.

Remove the 2 screws.


c.
B426421

w/o Mudguard

i.

Remove the 2 screws.

HINT:

Use the same procedure for the other side.




d.
B439946

w/ Mudguard

i.

Remove the screws.

HINT:

Use the same procedure for the other side.




e.
B426423

Remove the 2 bolts.


f.
B426424C01
0,0 0,0 false
V100155

Protective Tape


Put protective tape around the rear bumper cover.


g.
B426425

Detach the 5 claws.

HINT:

Use the same procedure to detach the claw on the other side.



h.
B426426

Remove the rear bumper cover as shown in the illustration.


Hide 58724 4.REMOVE NO. 2 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR

a.

Remove the 2 clips and No. 2 luggage compartment service cover protector.


Hide 58723 5.REMOVE NO. 1 LUGGAGE COMPARTMENT SERVICE COVER PROTECTOR

HINT:

Use the same procedure described for the LH side.


Hide 52023 6.REMOVE REAR BUMPER REINFORCEMENT SUB-ASSEMBLY

a.
B335671

for Step Type:

Remove the 6 bolts and rear bumper reinforcement sub-assembly.


b.
B335672

w/ TOYOTA Parking Assist-sensor System:

Remove the 6 bolts and rear bumper reinforcement sub-assembly.


c.
B335673

for Standard Type:

Remove the 6 bolts and rear bumper reinforcement sub-assembly.


Hide 52016A 7.REMOVE REAR BUMPER ARM SUB-ASSEMBLY LH

a.
B426429

Remove the 3 bolts and rear bumper arm sub-assembly LH.


Hide 52015A 8.REMOVE REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52156A 9.REMOVE REAR BUMPER SIDE SUPPORT LH

a.
B426430C01
0.875,0.188 1.188,0.385 0.313,0.198 10 false *a
*a 90°


Using a screwdriver, turn the clip 90° and remove the clip.


b.

Remove the screw.


c.

Detach the 3 claws and rear bumper side support LH.


Hide 52155A 10.REMOVE REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure described for the LH side.


Hide 52563A 11.REMOVE REAR BUMPER UPPER RETAINER LH

a.
B426431C01
2.99,1.281 3.198,1.51 0.208,0.229 10 false *a
*a 90°


Using a screwdriver, turn the clip 90° and remove the clip.


b.

Detach the 2 claws and rear bumper upper retainer LH.


Hide 52562B 12.REMOVE REAR BUMPER UPPER RETAINER RH

HINT:

Use the same procedure described for the LH side.