Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BACK DOOR OUTSIDE GARNISH(for Lower Side) › from 2015.10
RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0227101 BACK DOOR OUTSIDE GARNISH(for Lower Side) A

EXTERIOR PANELS / TRIM  BACK DOOR OUTSIDE GARNISH(for Lower Side)  REASSEMBLY  


PROCEDURE

Hide 76821 1.INSTALL UPPER BACK DOOR GARNISH MOULDING PROTECTOR

HINT:

When installing the upper back door garnish moulding protector, heat the lower back door outside garnish sub-assembly using a heat light.


Standard:
Item Temperature
Lower Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the lower back door outside garnish sub-assembly excessively.


a.

Clean the lower back door outside garnish sub-assembly surface.

i.

Using a heat light, heat the lower back door outside garnish sub-assembly surface.


ii.

Remove the double-sided tape from the lower back door outside garnish sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install the upper back door garnish moulding protector as shown in the illustration.

i.

Using a heat light, heat the lower back door outside garnish sub-assembly.


ii.

Remove the peeling paper from the face of the upper back door garnish moulding protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Align the upper back door garnish moulding protector with the mark-off line of the lower back door outside garnish sub-assembly, and then install it.

HINT:

Press the upper back door garnish moulding protector firmly to install it.


B432918C01
0.688,0.615 0.229,0.615 0.229,0.615 0.229,1.104 true 6.417,0.51 6.875,0.51 6.875,0.51 6.875,1 true 0.167,1.125 0.396,1.354 0.229,0.229 10 false *a 6.823,1.042 7.052,1.271 0.229,0.229 10 false *a
*a Mark-off Line - -




Hide 76822A 2.INSTALL LOWER BACK DOOR GARNISH MOULDING PROTECTOR

HINT:

When installing the lower back door garnish moulding protector, heat the lower back door outside garnish sub-assembly using a heat light.


Standard:
Item Temperature
Lower Back Door Outside Garnish Sub-assembly 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the lower back door outside garnish sub-assembly excessively.


a.

Clean the lower back door outside garnish sub-assembly surface.

i.

Using a heat light, heat the lower back door outside garnish sub-assembly surface.


ii.

Remove the double-sided tape from the lower back door outside garnish sub-assembly.


iii.

Wipe off any tape adhesive residue with cleaner.



b.

Install the lower back door garnish moulding protector as shown in the illustration.

i.

Using a heat light, heat the lower back door outside garnish sub-assembly.


ii.

Remove the peeling paper from the face of the lower back door garnish moulding protector.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Align the lower back door garnish moulding protector with the mark-off line of the lower back door outside garnish sub-assembly, and then install it.

HINT:

Press the lower back door garnish protector firmly to install it.


B432919C01
0.813,1.688 0.813,1.458 0.813,1.458 1.125,1.458 true 3.323,1.885 3.323,1.656 3.323,1.656 3.635,1.656 true 6.188,1.448 6.365,1.448 6.365,1.448 6.365,1.698 true 1.167,1.406 1.396,1.646 0.229,0.24 10 true *a 3.677,1.604 3.906,1.844 0.229,0.24 10 true *a 5.917,1.365 6.146,1.604 0.229,0.24 10 true *a
*a Mark-off Line - -