Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › NAME PLATE › from 2015.10
RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050107 NAME PLATE A

EXTERIOR PANELS / TRIM  NAME PLATE  INSTALLATION  


PROCEDURE

Hide 75441B 1.INSTALL BACK DOOR NAME PLATE

HINT:

When installing the back door name plate, heat the back door panel and back door name plate using a heat light.


Standard:
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
Back Door Name Plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or back door name plate excessively.


a.

Clean the back door panel surface.

i.

Using a heat light, heat the back door panel surface.


ii.

Remove the double-sided tape from the back door panel.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B433649C01
2.75,1.667 2.75,1.917 2.75,1.917 3,1.917 true 1.823,1.104 1.979,1.302 0.156,0.198 10 true A 2.521,1.094 2.677,1.292 0.156,0.198 10 true B 1.698,0.313 1.854,0.51 0.156,0.198 10 true C 1.031,0.792 1.188,0.99 0.156,0.198 10 true D 3.021,1.823 3.333,2.021 0.313,0.198 10 true *b 0.083,0.083 0.396,0.281 0.313,0.198 10 true *a
*a Reference Values
*b Horizontal Line


Install a new back door name plate.

i.

Using a heat light, heat the back door panel and a new back door name plate.


ii.

Remove the peeling paper from the face of the back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the back door name plate in the position shown in the illustration.

HINT:

Press the back door name plate firmly to install it.


Standard:
Area Specified Condition
A 170.2 mm (6.70 in.)
B 149.5 mm (5.89 in.)
C 332.0 mm (13.1 in.)
D 203.0 mm (7.99 in.)




Hide 75431A 2.INSTALL NO. 1 BACK DOOR EMBLEM

HINT:

When installing the No. 1 back door emblem, heat the back door panel and No. 1 back door emblem using a heat light.


Standard:
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
No. 1 Back Door Emblem 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or No. 1 back door emblem excessively.


a.

Clean the back door panel surface.

i.

Using a heat light, heat the back door panel surface.


ii.

Remove the double-sided tape from the back door panel.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B433650C01
2,1.667 2,1.917 2,1.917 2.333,1.917 true 0.896,1.146 1.052,1.344 0.156,0.198 10 true A 1.729,1.146 1.885,1.344 0.156,0.198 10 true B 1.552,0.292 1.708,0.49 0.156,0.198 10 true C 2.042,0.625 2.198,0.823 0.156,0.198 10 true D 0.052,0.063 0.365,0.26 0.313,0.198 10 true *a 2.344,1.802 2.573,2.021 0.229,0.219 10 true *b
*a Reference Values
*b Horizontal Line


Install a new No. 1 back door emblem.

i.

Using a heat light, heat the back door panel and a new No. 1 back door emblem.


ii.

Remove the peeling paper from the face of the No. 1 back door emblem.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 1 back door emblem in the position shown in the illustration.

HINT:

Press the No. 1 back door emblem firmly to install it.


Standard:
Area Specified Condition
A 149.2 mm (5.87 in.)
B 146.8 mm (5.78 in.)
C 341.2 mm (13.4 in.)
D 188.2 mm (7.41 in.)




Hide 75444A 3.INSTALL NO. 4 BACK DOOR NAME PLATE

HINT:

When installing the No. 4 back door name plate, heat the back door panel and No. 4 back door name plate using a heat light.


Standard:
Item Temperature
Back Door Panel 40 to 60°C (104 to 140°F)
No. 4 Back Door Name Plate 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the back door panel or No. 4 back door name plate excessively.


a.

Clean the back door panel surface.

i.

Using a heat light, heat the back door panel surface.


ii.

Remove the double-sided tape from the back door panel.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B426459C02
1.885,1.646 1.885,1.969 1.885,1.969 2.26,1.969 true 0.052,0.073 0.302,0.292 0.25,0.219 10 true *a 2.313,1.885 2.531,2.115 0.219,0.229 10 true *b 0.844,1.135 1,1.333 0.156,0.198 10 true A 1.396,1.135 1.552,1.333 0.156,0.198 10 true B 1.625,0.49 1.781,0.688 0.156,0.198 10 true C 1.938,0.833 2.094,1.031 0.156,0.198 10 true D
*a Reference Values
*b Horizontal Line


for Type A:

Install a new No. 4 back door name plate.

i.

Using a heat light, heat the back door panel and a new No. 4 back door name plate.


ii.

Remove the peeling paper from the face of the No. 4 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 4 back door name plate in the position shown in the illustration.

HINT:

Press the No. 4 back door name plate firmly to install it.


Standard:
Area Specified Condition
A 122.1 mm (4.81 in.)
B 122.9 mm (4.84 in.)
C 299.2 mm (11.8 in.)
D 211.2 mm (8.31 in.)




c.
B433652C01
1.99,1.667 1.99,1.917 1.99,1.917 2.323,1.917 true 1.24,1.208 1.396,1.406 0.156,0.198 10 true A 1.625,1.208 1.781,1.406 0.156,0.198 10 true B 1.771,0.719 1.927,0.917 0.156,0.198 10 true C 2,1.021 2.156,1.219 0.156,0.198 10 true D 0.104,0.052 0.417,0.25 0.313,0.198 10 true *a 2.333,1.802 2.646,2 0.313,0.198 10 true *b
*a Reference Values
*b Horizontal Line


for Type B:

Install a new No. 4 back door name plate.

i.

Using a heat light, heat the back door panel and a new No. 4 back door name plate.


ii.

Remove the peeling paper from the face of the No. 4 back door name plate.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Install the No. 4 back door name plate in the position shown in the illustration.

HINT:

Press the No. 4 back door name plate firmly to install it.


Standard:
Area Specified Condition
A 122.7 mm (4.83 in.)
B 123.0 mm (4.84 in.)
C 279.7 mm (11.0 in.)
D 211.5 mm (8.33 in.)