Home › Drivetrain › CLUTCH › CLUTCH RELEASE CYLINDER(for 2AD-FTV) › from 2015.10
RM3090E _52 Drivetrain _008754 CLUTCH _0227799 CLUTCH RELEASE CYLINDER(for 2AD-FTV) A

CLUTCH  CLUTCH RELEASE CYLINDER(for 2AD-FTV)  REASSEMBLY  


PROCEDURE

Hide 31477 1.INSTALL RELEASE CYLINDER BLEEDER PLUG

a.

Install the release cylinder plug to the release cylinder body.

Torque:
8.4 N*m (86 kgf*cm, 74 in.*lbf)


Hide 04313 2.INSTALL CLUTCH RELEASE CYLINDER KIT

a.

Install the bleeder plug cap on the release cylinder bleeder plug.


b.

Install a new compression spring on the release cylinder body.


c.
C128485

Coat the parts with lithium soap base glycol grease to the areas shown in the illustration.


d.

Install a new release cylinder piston on the release cylinder body.

NOTICE:

Be careful not to damage the inside of the release cylinder body.



e.

Install the No. 1 clutch release cylinder push rod on the release cylinder body.


f.

Install the clutch release cylinder boot on the release cylinder body.