Home › Vehicle Interior › SEAT › RELAY › from 2015.10
RM3090E _58 Vehicle Interior _008433 SEAT _0227819 RELAY G

SEAT  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85910Y 1.INSPECT REAR HEATER RELAY

a.
E226254N05
2.896,0.802 3.177,0.802 false 3.177,1.125 2.781,1.125 false 2.021,0.813 2.313,0.813 false 3.177,1.573 2.781,1.573 false 1.906,0.729 2.021,0.927 0.115,0.198 10 1 3.208,0.719 3.323,0.917 0.115,0.198 10 2 3.208,1.042 3.323,1.24 0.115,0.198 10 5 3.208,1.49 3.323,1.688 0.115,0.198 10 3

Remove the rear heater relay.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω


If the result is not as specified, replace the rear heater relay.