Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY(for LED Headlight) › from 2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0229549 HEADLIGHT ASSEMBLY(for LED Headlight) A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY(for LED Headlight)  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81134 1.INSTALL HEADLIGHT GASKET

a.

Install a new headlight gasket to the ECU base.


Hide 81056 2.INSTALL NO. 1 HEADLIGHT ECU SUB-ASSEMBLY LH

a.

Install the No. 1 headlight ECU sub-assembly LH to the ECU base with the 2 screws.


b.

Connect the connector.


c.
E349059C01
0.948,1.479 1.458,0.698 true 0.729,1.156 1.396,0.615 true 1.74,3.125 2.573,2.76 true 0.844,1.49 1.156,1.646 0.313,0.156 10 false *a 0.573,1.104 0.885,1.26 0.313,0.156 10 false *b 2.615,2.635 2.927,2.792 0.313,0.156 10 false *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark


Align the matchmark of the ECU base to the unlock position mark, and then rotate the ECU base clockwise until the lock position mark to install the ECU base.


Hide 81510C 3.INSTALL FRONT TURN SIGNAL LIGHT BULB

a.
E273986

Install the front turn signal light bulb to the front turn signal light socket.


Hide 81515B 4.INSTALL FRONT TURN SIGNAL LIGHT SOCKET

a.
E332599C01
1.427,1.396 1.229,2.031 true 1.323,1.406 0.625,1.406 true 1.26,3.76 0.531,3.76 true 1.135,2.063 1.354,2.26 0.219,0.198 10 true *a 0.417,1.323 0.615,1.521 0.198,0.198 10 true *b 0.396,3.667 0.604,3.875 0.208,0.208 10 true *c
*a Matchmark
*b Unlock Position Mark
*c Lock Position Mark


Align the matchmark of the front turn signal light socket to the unlock position mark, and then rotate the front turn signal light socket clockwise until the lock position mark to install the front turn signal light socket.