Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050200 REAR COMBINATION LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81561D 1.INSPECT REAR COMBINATION LIGHT LENS AND BODY LH

a.
E127507C18
0.115,0.135 0.427,0.292 0.313,0.156 10 false *a
*a Component without harness connected
(Rear Combination Light Lens and Body LH)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Taillight illuminates


If the result is not as specified, replace the rear combination light lens and body LH.


Hide 81551D 2.INSPECT REAR COMBINATION LIGHT LENS AND BODY RH

a.
E127507C18
0.115,0.135 0.427,0.292 0.313,0.156 10 false *a
*a Component without harness connected
(Rear Combination Light Lens and Body RH)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → 1
Battery negative (-) → 2
Taillight illuminates


If the result is not as specified, replace the rear combination light lens and body RH.


Hide 81536A 3.INSPECT REAR COMBINATION LIGHT LED

a.
E339493C03
0.115,0.104 0.427,0.26 0.313,0.156 10 false *a
*a Component without harness connected
(Rear Combination Light LED)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → 2
Battery negative (-) → 1
Stop light illuminates


If the result is not as specified, replace the rear combination light LED.