Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY › from 2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050104 REAR LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81590A 1.INSPECT REAR LIGHT ASSEMBLY LH

a.
E335348C03
1.521,0.24 1.927,0.479 0.406,0.24 1.094,1.74 1.51,1.323 true 1.927,1.229 2.448,0.771 true 0.104,0.073 0.417,0.229 0.313,0.156 10 false *a 1.594,0.25 2.052,0.448 0.458,0.198 10 false U24 2.49,0.667 2.646,0.865 0.156,0.198 10 false B 0.958,1.677 1.115,1.875 0.156,0.198 10 false E
*a Component without harness connected
(Rear Light assembly LH)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → U24-1 (B)
Battery negative (-) → U24-2 (E)
Taillight illuminates


If the result is not as specified, replace the rear light assembly LH.


Hide 81580D 2.INSPECT REAR LIGHT ASSEMBLY RH

a.
E335348C04
1.521,0.24 1.927,0.479 0.406,0.24 1.094,1.74 1.51,1.323 true 1.927,1.229 2.448,0.771 true 0.104,0.073 0.417,0.229 0.313,0.156 10 false *a 1.594,0.25 2.052,0.448 0.458,0.198 10 false U25 2.49,0.667 2.646,0.865 0.156,0.198 10 false B 0.958,1.677 1.115,1.875 0.156,0.198 10 false E
*a Component without harness connected
(Rear Light assembly RH)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → U25-1 (B)
Battery negative (-) → U25-2 (E)
Taillight illuminates


If the result is not as specified, replace the rear light assembly RH.