Home › Vehicle Exterior › LIGHTING (EXT) › BACK-UP LIGHT ASSEMBLY › from 2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0229559 BACK-UP LIGHT ASSEMBLY A

LIGHTING (EXT)  BACK-UP LIGHT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.INSTALL BACK-UP LIGHT ASSEMBLY LH

a.

Install the back up light assembly LH with the 2 screws and 2 clips.


b.

w/o Rear Fog Light:

Connect the connector and attach the wire harness clamp.


c.

w/ Rear Fog Light:

Connect the 2 connectors and attach the wire harness clamp.