Home › Vehicle Exterior › LIGHTING (EXT) › REAR FOG LIGHT ASSEMBLY › from 2015.10
RM3090E _59 Vehicle Exterior _008430 LIGHTING (EXT) _0050103 REAR FOG LIGHT ASSEMBLY G

LIGHTING (EXT)  REAR FOG LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81455 1.INSPECT REAR FOG LIGHT LED (for LH Side)

a.
E339493C01
1.542,0.229 1.875,0.49 0.333,0.26 0.115,0.104 0.427,0.26 0.313,0.156 10 false *a 1.625,0.271 1.938,0.469 0.313,0.198 10 false S7
*a Component without harness connected
(Rear Fog Light LED)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → S7-2
Battery negative (-) → S7-1
Illuminates


If the result is not as specified, replace the rear fog light LED.


Hide 81455 2.INSPECT REAR FOG LIGHT LED (for RH Side)

a.
E339493C02
1.542,0.229 1.875,0.49 0.333,0.26 0.115,0.104 0.427,0.26 0.313,0.156 10 false *a 1.625,0.271 1.938,0.469 0.313,0.198 10 false S8
*a Component without harness connected
(Rear Fog Light LED)


Apply battery voltage to the connector and check the light illumination condition.

OK:
Condition Specified Condition
Battery positive (+) → S8-2
Battery negative (-) → S8-1
Illuminates


If the result is not as specified, replace the rear fog light LED.