Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VSC OFF SWITCH › from 2015.10
RM3090E _54 Brake _008767 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0049573 VSC OFF SWITCH G

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VSC OFF SWITCH  INSPECTION  


PROCEDURE

Hide 83950M 1.INSPECT TELLTALE LIGHT ASSEMBLY (VSC OFF SWITCH)

a.
E269059C09
1.76,1.031 1.76,0.344 1.76,0.344 2.104,0.344 true 2.49,1.24 2.958,1.24 true 2.198,0.25 2.51,0.448 0.313,0.198 10 false + 0.104,0.094 0.417,0.292 0.313,0.198 10 false *a 3.01,1.156 3.167,1.354 0.156,0.198 10 false E
*a Component without harness connected
(Telltale Light Assembly (VSC OFF Switch))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
6 (+) - 13 (E) Switch not pushed 10 kΩ or higher
Switch pushed Below 1 Ω


If the result is not as specified, replace the telltale light assembly (VSC OFF switch).