Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX › from 2015.10
RM3090E _58 Vehicle Interior _008791 INTERIOR PANELS / TRIM _0049316 FRONT CONSOLE BOX A

INTERIOR PANELS / TRIM  FRONT CONSOLE BOX  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 33504F 1.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

a.
B438410

Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.


Hide 33504F 2.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (except Manual Transaxle)

a.
B423629

Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.


Hide 58809B 3.REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY

a.
B423631C01
0,0 0,0 false
V100155

Protective Tape


Apply protective tape as shown in the illustration.


b.

Using moulding remover B, detach the 9 clips and claw and remove the parking brake hole cover sub-assembly.


Hide 58804A 4.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)

a.
B438411

Pull up the shift lever boot and disconnect it from the shift lever assembly.


b.

Apply protective tape as shown in the illustration.


c.

Using moulding remover B, detach the 12 clips and remove the upper console panel sub-assembly.

B438315C01
0,0 0,0 false
V100155

Protective Tape - -



Hide 58804A 5.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (except Manual Transaxle)

a.

Apply protective tape as shown in the illustration.


b.

Using moulding remover B, detach the 12 clips and remove the upper console panel sub-assembly.

B423633C01
0,0 0,0 false
V100155

Protective Tape - -



c.
B337852

Disconnect the connector.


Hide 55395C 6.REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER LH

B337848

a.

Detach the 2 clips and guide and remove the inner No. 1 instrument panel bracket cover LH.


Hide 55394D 7.REMOVE INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH

B337849

a.

Detach the 2 clips and guide and remove the inner No. 1 instrument panel bracket cover RH.


Hide 58805C 8.REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

a.
B337857

Detach the 4 claws and remove the upper rear console panel sub-assembly.


Hide 58815A 9.REMOVE CONSOLE BOX CARPET

a.
B337858

Remove the console box carpet.


Hide 55434B 10.REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

a.
B337859C01
2.125,2.396 2.281,2.594 0.156,0.198 10 false .
V100155

Protective Tape.


Apply protective tape as shown in the illustration.


b.

Using moulding remover B, detach the 5 clips and remove the lower center instrument panel finish panel.


Hide 58903A 11.REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY

a.
B423635

Detach the 4 clips and 2 claws.


b.

Disconnect the connector and remove the console rear end panel sub-assembly.


Hide 58901A 12.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

a.

Remove the 2 screws and 4 bolts.


b.

Detach the clamp and remove the rear console box sub-assembly.

B337861C01
3.448,0.323 3.646,0.479 0.198,0.156 10 true *1 4.083,0.625 4.302,0.781 0.219,0.156 10 true *2 2.896,0.448 3.094,0.604 0.198,0.156 10 true *1 3.865,0.781 4.083,0.938 0.219,0.156 10 true *2 4.313,1 4.531,1.156 0.219,0.156 10 true *2 4.531,0.875 4.75,1.031 0.219,0.156 10 true *2
*1 Screw *2 Bolt