Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL › from 2015.10
RM3090E _58 Vehicle Interior _008791 INTERIOR PANELS / TRIM _0049315 LOWER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  LOWER INSTRUMENT PANEL  REASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 89611 2.INSTALL PUSH START SWITCH (for RHD with Entry and Start System)

Hide 899A0 3.INSTALL NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (w/ Entry and Start System)

Hide 84988H 4.INSTALL DOWNHILL ASSIST CONTROL SWITCH (w/ Downhill Assist Control)

Hide 84725A 6.INSTALL DIFFERENTIAL LOCK SWITCH (for 4WD/AWD)

Hide 55539 7.INSTALL SPARE SWITCH HOLE COVER

HINT:

Use the same procedure for all the spare switch hole covers.


a.

Attach the 2 claws to install the spare switch hole cover.


Hide 55447C 8.INSTALL NO. 2 SWITCH HOLE BASE

a.

Attach the claw and 3 clips to install the No. 2 switch hole base.


Hide 55054 9.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

a.

Attach the clip to install the glove compartment door stopper sub-assembly.