Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR OUTSIDE MOULDING › from 2015.10
RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050284 FRONT DOOR OUTSIDE MOULDING A

EXTERIOR PANELS / TRIM  FRONT DOOR OUTSIDE MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedures for the RH side and LH side.

·

The procedures listed below are for the LH side.



PROCEDURE

Hide 75736B 1.INSTALL FRONT DOOR LOWER OUTSIDE MOULDING LH

HINT:

When installing the front door lower outside moulding LH, heat the front door panel and front door lower outside moulding LH using a heat light.


Standard:
Item Temperature
Front Door Panel 40 to 60°C (104 to 140°F)
front door lower outside moulding LH 20 to 30°C (68 to 86°F)


NOTICE:

Do not heat the front door panel and front door lower outside moulding LH excessively.


a.

Clean the front door panel surface.

i.

Using a heat light, heat the front door panel surface.


ii.

Remove the double-sided tape from the front door panel surface.


iii.

Wipe off any tape adhesive residue with cleaner.



b.
B437077C01
1.75,1.521 1.75,1.021 true 1.688,1.542 2,1.74 0.313,0.198 10 false *a
*a Double-sided Tape


Install the front door lower outside moulding LH.

i.

Using a heat light, heat the front door lower outside moulding LH and the front door panel surface.


ii.

Remove the peeling paper from the face of the front door upper outside moulding pad.

HINT:

After removing the peeling paper, keep the exposed adhesive free from foreign matter.



iii.

Attach the 8 clips and double-sided tape to install the front door lower outside moulding LH.

HINT:

Press the front door lower outside moulding LH firmly to install it.