These DTCs are stored when the clearance warning ECU assembly cannot receive and recognize certain signals via the CAN communication system.
| DTC No. | Detection Item | Trouble Area |
|---|---|---|
| U0100 | Lost Communication with ECM / PCM "A" | CAN communication system |
| U0101 | Lost Communication with ECM | CAN communication system |
| U0142 | Lost Communication with Body Control Module "B" | CAN communication system |
| U0155 | Lost Communication With Instrument Panel Cluster (IPC) Control Module | CAN communication system |
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harness of each ECU.
| Result | Proceed to |
|---|---|
| CAN communication system DTCs are output (for LHD) | A |
| CAN communication system DTCs are output (for RHD) | B |
| CAN communication system DTCs are not output | C |
A
B
C
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING