Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 8 Sensor Type) › from 2015.10
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0232443 TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 8 Sensor Type) W

PARK ASSIST / MONITORING  TOYOTA PARKING ASSIST-SENSOR SYSTEM(for 8 Sensor Type)  CUSTOMIZE PARAMETERS  


CUSTOMIZE TOYOTA PARKING ASSIST-SENSOR SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the clearance sonar main switch on.


iv.

Turn the GTS on.


v.

Enter the following menus: Body Electrical / Clearance Sonar / Utility / Customize.


vi.

Select the setting by referring to the table below.

Warning
Display Default Content Setting Relevant ECU
Fr Sensor Onset Range Wide Sets the detection operation range for the front center sensors. Narrow or Wide Clearance warning ECU assembly
Rr Sensor Onset Range Wide Sets the detection operation range for the rear center sensors. Narrow or Wide Clearance warning ECU assembly
Keep Sense Buzzer Avail Sounds the buzzer when the distance between the vehicle and obstacle does not change for more than 3 seconds. Not Avail or Avail
·

Not Avail: Not Available

·

Avail: Available


Clearance warning ECU assembly
Fr & Rr Buzzer Volume M2 Changes the buzzer volume setting. L, M1, M2, M3 or H
·

L: Low volume

·

M1: Medium low volume

·

M2: Medium volume

·

M3: Medium high volume

·

H: High volume


Clearance warning ECU assembly
Temporary Mute Reset Speed Adjust 20 km/h Sets the vehicle speed at which the temporary mute function resets. 00: System Link, 01: 15 km/h, 10: 20 km/h, 11: 30 km/h Clearance warning ECU assembly
Temporary Mute Function ON Sets the availability of the temporary mute function. 0: OFF,1: ON Clearance warning ECU assembly

Sensor
Display Default Content Setting Relevant ECU
Sensor Condition N Avail Makes the front sensors available when the shift lever is in N. Not Avail or Avail
·

Not Avail: Not Available

·

Avail: Available


Clearance warning ECU assembly
Reverse Range Front Sensor Fcrn Changes the operation setting for the front sensors when the shift lever is in R. F, Fcrn or F Stop
·

F: All front sensors are available

·

Fcrn: Front corner sensors are available

·

F Stop: All Front sensors are not available


Clearance warning ECU assembly
Non P/R Range Rear Sensor R Stop Changes the operation setting for the rear sensors when the shift lever is in any position other than P or R. R, Rcrn or R Stop
·

R: All rear sensors are available

·

Rcrn: Rear corner sensors are available

·

R Stop: All rear sensors are not available


Clearance warning ECU assembly

Display
Display Default Content Setting Relevant ECU
Display Mode All The display mode setting (when the TOYOTA parking assist-sensor system is normal). All or Undisp Clearance warning ECU assembly



b.

Customizing with Multi-display

i.

Turn the ignition switch to ON.


ii.

Turn the clearance sonar main switch on.


iii.

Enter the following menus: MENU / Setup / Vehicle / TOYOTA Park Assist Settings.


iv.

Select the setting by referring to the table below.

Tester Display Description Default Setting ECU
Alert volume Sets the buzzer alert volume. 3 1, 2, 3, 4 or 5 Clearance warning ECU assembly
Display The display mode setting (when the TOYOTA parking assist-sensor system isnormal). Indicator of Display Off not illuminated*1 Indicator of Display Off not illuminated*1 or indicator of Display Off illuminated*2 Clearance warning ECU assembly
Distance Front Sets the detection operation range for the front center sensors. Green*3 Orange*3 or Green*4 Clearance warning ECU assembly
Distance Rear Sets the detection operation range for the rear center sensors. Green*5 Orange*5 or Green*6 Clearance warning ECU assembly

*1: Sonar indication is available on the multi-display

*2: Sonar indication is not available on the multi-display

*3: Detection range of 600 mm (23.6 in.)

*4: Detection range of 1500 mm (59.1 in.)

*5: Detection range of 500 mm (19.7 in.)

*4: Detection range of 1000 mm (39.4 in.)