Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › PANORAMIC VIEW MONITOR SYSTEM › from 2015.10
RM3090E _56 Audio / Visual / Telematics _008432 PARK ASSIST / MONITORING _0232444 PANORAMIC VIEW MONITOR SYSTEM D

PARK ASSIST / MONITORING  PANORAMIC VIEW MONITOR SYSTEM  INITIALIZATION  


INITIALIZE PANORAMIC VIEW MONITOR SYSTEM


a.

When "!" mark is displayed on the navigation receiver assembly*1 or radio and display receiver assembly*2, correct the steering angle neutral point using the following method.

*1: w/ Navigation System

*2: w/ Audio and Visual System (for Radio and Display Type)


i.

Fully turn the steering wheel to the left and right on flat ground.

NOTICE:

Memorizing the steering angle neutral point must be carried out with the engine starts. Apply the parking brake, depress the brake pedal, check that the shift lever is in P, and ensure that the vehicle is not moving.


HINT:

If the steering angle neutral point cannot be memorized by fully turning the steering wheel to the left and right perform Steering Angle Setting in Calibration.

Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>CALIBRATION