These DTCs are stored when the parking assist ECU receives a wheel speed sensor (front speed sensor RH or front speed sensor LH, rear speed sensor RH or rear speed sensor LH) abnormality signal from the vehicle stability control system via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C164D | Front Wheel Speed Sensor Malfunction | Front wheel speed sensor malfunction | Vehicle stability control system |
| C1658 | Rear Wheel Speed Sensor Malfunction | Rear wheel speed sensor malfunction | Vehicle stability control system |
Clear the DTCs.
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR
Check for DTCs.
Click hereAudio / Visual / Telematics>PARK ASSIST / MONITORING>PANORAMIC VIEW MONITOR SYSTEM>DTC CHECK / CLEAR
DTCs C164D and C1658 are not output.
| Proceed to |
|---|
| OK |
| NG |
If the parking assist ECU cannot read the stored information when activated, allowing the ECU to store the information again may return the system to normal.
The DTC is stored when a malfunction occurs in the vehicle stability control system.
If troubleshooting and repair of the malfunction in the vehicle stability control system have been completed, DTC C164D and C1658 will not be output again when rechecking for DTCs.
If DTC C164D is stored frequently, duplicate the problem symptoms and perform the inspection again even if the DTC is not output when rechecking for DTCs.
OK
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
NG