Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2015.10
RM3090E _58 Vehicle Interior _044382 PRE-CRASH SAFETY _0224751 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  OPERATION CHECK  


CHECK PRE-CRASH SAFETY SYSTEM SETTING


a.

Turn the ignition switch to ON.


b.
B403409C07
0.052,0.031 0.365,0.229 0.313,0.198 10 false *a
*a PCS Indicator Light


Operate the steering pad switch assembly to select PCS OFF on the multi-information display and check that the PCS indicator light illuminates.

HINT:
·

If the ignition switch is turned off with the pre-crash safety system off, the pre-crash safety system will turn on when the ignition switch is turned to ON again.

·

The previous state of the pre-crash safety system can be retained when the customize setting "PCS Operation State Retention Setting" is set to "ON" using the GTS





CHECK PRE-CRASH SAFETY SYSTEM SENSITIVITY SETTING


a.

Turn the ignition switch to ON.


b.

Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly.

HINT:

The default setting is "Mid".