Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) › from 2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0226195 LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM(w/ Steering Control)  TERMINALS OF ECU  


FORWARD RECOGNITION CAMERA


NOTICE:
·

DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

·

Do not apply excessive force to the Q17 forward recognition camera connector.



a.

Check forward recognition camera

E256359C08
1.708,0.729 2.146,0.979 0.438,0.25 1.802,0.781 2.26,0.979 0.458,0.198 10 false Q17

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
Q17-7 (IGB) - Body ground GR - Body ground Power source Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
Q17-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
Q17-5 (CA1P) - Body ground G - Body ground CAN communication signal Ignition switch ON Pulse generation
(Waveform 1)
Q17-11 (CA1N) - Body ground LG - Body ground Pulse generation
(Waveform 2)
Q17-6 (CANH) - Body ground L - Body ground Pulse generation
(Waveform 1)
Q17-12 (CANL) - Body ground W - Body ground Pulse generation
(Waveform 2)


b.

WAVEFORM 1

i.
A292386E03
1.344,1.917 2.313,2.146 0.969,0.229 10 false 10 μsec./DIV. 2.76,0.219 3.333,0.427 0.573,0.208 10 false 1 V/DIV. 3,1.406 3.365,1.583 0.365,0.177 10 false GND

CAN communication signal

Item Content
Terminal Name Between Q17-5 (CA1P) and Q17-10 (GND)
Between Q17-6 (CANH) and Q17-10 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.




c.

WAVEFORM 2

i.
A292387E07
3,1.375 3.344,1.573 0.344,0.198 10 false GND 2.781,0.26 3.417,0.458 0.635,0.198 10 false 1 V/DIV. 1.375,1.885 2.323,2.135 0.948,0.25 10 false 10 μsec./DIV.

CAN communication signal

Item Content
Terminal Name Between Q17-11 (CA1N) and Q17-10 (GND)
Between Q17-12 (CANL) and Q17-10 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.





DRIVING SUPPORT ECU


a.

Check driving support ECU

E321781E15
3.271,0.115 3.688,0.365 0.417,0.25 3.313,0.167 3.75,0.385 0.438,0.219 10 false G168

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
G168-5 (PBSW) - G168-28 (GND) R - BR Lane departure alert main switch signal Ignition switch ON, lane departure alert main switch ON Below 1 V
Ignition switch ON, lane departure alert main switch off 11 to 14 V
G168-7 (B) - G168-28 (GND) B*1 - BR
V*2 - BR
Power source Ignition switch ON 11 to 14 V
G168-8 (CA1P) - G168-28 (GND) B - BR CAN communication signal Ignition switch ON Pulse generation
(Waveform 1)
G168-9 (CA1N) - G168-28 (GND) W - BR Pulse generation
(Waveform 2)
G168-10 (CA2H) - G168-28 (GND) P - BR Pulse generation
(Waveform 1)
G168-11 (CA2L) - G168-28 (GND) LG - BR Pulse generation
(Waveform 2)
G168-28 (GND) - Body ground BR - Body ground Ground Always Below 1 Ω

*1: w/o Stop and Start System

*2: w/ Stop and Start System



b.

WAVEFORM 1

i.
A292386E03
1.344,1.917 2.313,2.146 0.969,0.229 10 false 10 μsec./DIV. 2.76,0.219 3.333,0.427 0.573,0.208 10 false 1 V/DIV. 3,1.406 3.365,1.583 0.365,0.177 10 false GND

CAN communication signal

Item Content
Terminal Name Between G168-8 (CA1P) and G168-28 (GND)
Between G168-10 (CA2H) and G168-28 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.




c.

WAVEFORM 2

i.
A292387E07
3,1.375 3.344,1.573 0.344,0.198 10 false GND 2.781,0.26 3.417,0.458 0.635,0.198 10 false 1 V/DIV. 1.375,1.885 2.323,2.135 0.948,0.25 10 false 10 μsec./DIV.

CAN communication signal

Item Content
Terminal Name Between G168-9 (CA1N) and G168-28 (GND)
Between G168-11 (CA2L) and G168-28 (GND)
Tester Range 1 V/DIV., 10 μsec./DIV.
Condition Ignition switch ON

HINT:

The waveform varies depending on the CAN communication signal.