Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) › from 2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0226195 LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM(w/ Steering Control)  FAIL-SAFE CHART  


FAIL-SAFE FUNCTION


a.

When a malfunction occurs in the lane departure alert system (w/ steering control), a message will be displayed on the multi-information display in the combination meter assembly and the LKA/LDA system will be disabled depending on the malfunction.

Warning Message Cause Fail-safe Operation Conditions to Return to Normal Condition
Lane Departure Alert Function Lane Departure Control Function Vehicle Sway Warning
Lane Departure Alert Malfunction Visit Your Dealer Lane departure alert system (w/ Steering Control) is malfunctioning X X X After system returns to normal, engine switch is turned off and then on (IG)
Forward Camera System Unavailable
·

Abnormal forward recognition camera voltage

·

Forward recognition camera temperature outside of operational range

·

Other forward recognition camera malfunction


X X X
·

Forward recognition camera temperature returns to normal

·

Forward recognition camera voltage returns to normal

·

Forward recognition camera returns to normal


Forward Camera System Unavailable Clean Windshield Forward recognition camera view is unclear X X X Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned
Lane Departure Alert Unavailable Sensor other than forward recognition camera sensor is temporarily unavailable X X X Temporarily unavailable sensor becomes available

X: Control is suspended