Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM › from 2015.10
RM3090E _51 Engine / Hybrid System _008749 CRUISE CONTROL _0226194 DYNAMIC RADAR CRUISE CONTROL SYSTEM D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM  OPERATION CHECK  


INPUT SIGNAL CHECK


a.
C342099C02
1.948,0.302 2.26,0.458 0.313,0.156 10 false *a 1.938,1.781 2.25,1.938 0.313,0.156 10 false *b 2.896,1.604 3.208,1.76 0.313,0.156 10 false *c 0.448,1.604 0.76,1.76 0.313,0.156 10 false *d
*a +RES
*b -SET
*c ON/OFF
*d CANCEL


Connect the GTS to the DLC3.


b.

Check the cruise control switch using the Data List function of the GTS (ON/OFF, -/SET, +/RES and CANCEL).



INSPECT MODE SWITCH


a.
E328535C06
3,1.615 3.313,1.813 0.313,0.198 10 false *a
*a ON/OFF


Turn the ignition switch to ON.


b.

Push and hold the switch of the cruise control switch (ON/OFF button) for 1.5 seconds or more with the dynamic radar cruise control system off to change to the constant speed control mode.


c.
E224649C07
1.042,0.756 1.226,0.919 0.184,0.163 10 *1 1.042,2.561 1.226,2.724 0.184,0.163 10 *2
*1 Cruise Control Indicator
(Vehicle-to-vehicle Distance Control Mode)
*2 Cruise Control Indicator
(Constant Speed Control Mode)


Check that the cruise control indicator (vehicle-to-vehicle distance control mode) goes off and the cruise control indicator (constant speed control mode) illuminates.

HINT:

If a malfunction is detected, turn the ignition switch off and repeat the procedure above.




INSPECT STEERING PAD SWITCH ASSEMBLY


a.

Turn the ignition switch to ON.


b.

Turn the dynamic radar cruise control system on using the cruise control switch (ON/OFF).


c.
C344702C01
1.75,1.333 2.667,1.833 2.667,1.833 2.833,1.833 true 2.875,1.76 3.188,1.958 0.313,0.198 10 false *1 3.167,0.083 3.385,0.333 0.219,0.25 10 false *A
*1 Vehicle-to-vehicle Distance Control Switch
*A w/o Speed Limiter System


C349263C02
1.917,1.417 2.583,1.833 2.583,1.833 2.75,1.833 true 2.792,1.75 3.104,1.948 0.313,0.198 10 false *1 3.188,0.063 3.406,0.26 0.219,0.198 10 false *A
*1 Vehicle-to-vehicle Distance Control Switch
*A w/ Speed Limiter System


Press the vehicle-to-vehicle distance control switch of the steering pad switch assembly.


d.

Check that the indication of the vehicle-to-vehicle distance, which is shown on the multi-information display (combination meter assembly), changes from long to middle to short in that order.

HINT:

Long is automatically selected each time the ignition switch is turned to ON.