Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM › from 2015.10
RM3090E _58 Vehicle Interior _008782 DOOR LOCK _0051217 POWER DOOR LOCK CONTROL SYSTEM U

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  TERMINALS OF ECU  


CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)


C278789N02
0.479,5.302 0.896,5.583 0.417,0.281 2.542,5.208 2.958,5.49 0.417,0.281 5.615,5.229 6.031,5.51 0.417,0.281 1.781,6.969 2.198,7.25 0.417,0.281 5.448,7.042 5.865,7.323 0.417,0.281 2.333,1.229 2.615,1.427 0.281,0.198 10 3B 3.01,0.938 3.292,1.135 0.281,0.198 10 3E 3.656,1.083 3.938,1.281 0.281,0.198 10 3C 4.344,1.208 4.625,1.406 0.281,0.198 10 3D 2.271,2.969 2.552,3.167 0.281,0.198 10 3A 0.604,5.365 0.885,5.563 0.281,0.198 10 3A 2.677,5.271 2.958,5.469 0.281,0.198 10 3B 5.729,5.292 6.01,5.49 0.281,0.198 10 3C 1.917,7.031 2.198,7.229 0.281,0.198 10 3D 5.573,7.104 5.854,7.302 0.281,0.198 10 3E

C278790C04
1.333,3.667 1.75,3.896 0.417,0.229 2.531,5.563 2.948,5.792 0.417,0.229 3.333,7.438 3.75,7.667 0.417,0.229 1.365,7.458 1.781,7.688 0.417,0.229 1.25,5.25 1.417,5.25 1.417,5.25 1.667,4.833 false 1.083,7.25 1.333,7.25 1.333,7.25 1.583,7 false 2.667,1.656 2.823,1.854 0.156,0.198 10 A 1.5,3.698 1.656,3.896 0.156,0.198 10 A 0.313,4.281 0.563,4.458 0.25,0.177 10 *A 1.083,5.167 1.333,5.344 0.25,0.177 10 *1 2.615,5.594 3.052,5.76 0.438,0.167 10 G78 3.406,7.469 3.865,7.635 0.458,0.167 10 G78 1.427,7.49 1.781,7.667 0.354,0.177 10 G79 0.917,7.167 1.167,7.344 0.25,0.177 10 *1 0.281,6.646 0.531,6.823 0.25,0.177 10 *B
*A Main Body ECU (Multiplex Network Body ECU) with 1 connector *B Main Body ECU (Multiplex Network Body ECU) with 3 connectors
*1 Main Body ECU (Multiplex Network Body ECU) - -


a.

Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly.

for LHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU(for LHD)>REMOVAL

for RHD: Click herePower Source / Network>POWER DISTRIBUTION>MAIN BODY ECU(for RHD)>REMOVAL


b.

Measure the voltage and resistance according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition

*1: w/o Stop and Start System

*2: w/ Stop and Start System

A-11 (GND1) - Body ground - Ground Always Below 1 Ω
A-30 (BECU) - Body ground - Battery power supply Always 11 to 14 V
A-29 (ACC) - Body ground - ACC power supply Ignition switch ACC 11 to 14 V
A-29 (ACC) - Body ground - ACC power supply Ignition switch off Below 1 V
A-32 (IG) - Body ground - Ignition power supply Ignition switch ON 11 to 14 V*1
10.5 to 14 V*2
A-32 (IG) - Body ground - Ignition power supply Ignition switch off Below 1 V



d.

Measure the voltage and check for pulses according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition

*1: w/ Entry and Start System or Theft Deterrent System or Double Locking System

*2: w/o Entry and Start System

*3: for LHD

*4: for RHD

*5: w/ Panic Switch

*6: w/o Panic Switch

*7: w/o Power Back Door System

*8: w/ Door Control Battery

*9: Door control battery not charged

*10: Door control battery charging or charged

3B-7 (ACTG) - Body ground*8 L - Body ground Collision door lock release signal Collision door lock release function does not operate Below 2 V*9
7.3 to 9.9 V*10
Collision door lock release function operates Below 1 V
3E-1 (ACT-) - Body ground BR - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3E-1 (ACT-) - Body ground BR - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
3D-5 (ACT-) - Body ground*6 B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3D-5 (ACT-) - Body ground*6 B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
3D-4 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3D-4 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
3D-3 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3D-3 (ACT-) - Body ground B - Body ground Door lock motor unlock drive output (all door) Door control switch (power window regulator master switch assembly) or driver door key cylinder unlocked 11 to 14 V
3D-10 (ACTD) - Body ground*5 B - Body ground Door lock motor unlock drive output (all door) Power window regulator master switch assembly, door control switch assembly or driver door key cylinder off Below 1 V
3D-10 (ACTD) - Body ground*5 B - Body ground Door lock motor unlock drive output (all door) Power window regulator master switch assembly, door control switch assembly or driver door key cylinder unlocked 11 to 14 V
3D-13 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
3D-13 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3D-11 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
3D-11 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3D-12 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
3D-12 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder off Below 1 V
3E-17 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked Below 1 V
3E-17 (ACT+) - Body ground R - Body ground Door lock motor lock drive output (all doors) Door control switch (power window regulator master switch assembly) or driver door key cylinder locked 11 to 14 V
G78-19 (FRCY) - Body ground L - Body ground Front door courtesy light switch RH input Front door RH open Below 1 V
G78-19 (FRCY) - Body ground L - Body ground Front door courtesy light switch RH input Front door RH closed Pulse generation
3E-40 (FLCY) - Body ground W - Body ground Front door courtesy light switch LH input Front door LH open Below 1 V
3E-40 (FLCY) - Body ground W - Body ground Front door courtesy light switch LH input Front door LH closed Pulse generation
G78-1 (LCTY) - Body ground*5 W - Body ground Rear door courtesy light switch LH input Rear door LH open Below 1 V
G78-1 (LCTY) - Body ground*5 W - Body ground Rear door courtesy light switch LH input Rear door LH closed Pulse generation
G78-24 (LCTY) - Body ground*6 W - Body ground*3
SB - Body ground*4
Rear door courtesy light switch LH input Rear door LH open Below 1 V
G78-24 (LCTY) - Body ground*6 W - Body ground*3
SB - Body ground*4
Rear door courtesy light switch LH input Rear door LH closed Pulse generation
G78-6 (RCTY) - Body ground Y - Body ground Rear door courtesy light switch RH input Rear door RH open Below 1 V
G78-6 (RCTY) - Body ground Y - Body ground Rear door courtesy light switch RH input Rear door RH closed Pulse generation
G78-9 (L1) - Body ground P - Body ground*3
V - Body ground*4
Door control switch input Door control switch locked Below 1 V
G78-9 (L1) - Body ground P - Body ground*3
V - Body ground*4
Door control switch input Door control switch off Pulse generation
G78-10 (UL1) - Body ground B - Body ground*3
W - Body ground*4
Door control switch input Door control switch unlocked Below 1 V
G78-10 (UL1) - Body ground B - Body ground*3
W - Body ground*4
Door control switch input Door control switch off Pulse generation
G78-11 (L2) - Body ground BR - Body ground*3
R - Body ground*4
Driver door key-linked lock input Driver door key cylinder turned to lock position Below 1 V
G78-11 (L2) - Body ground BR - Body ground*3
R - Body ground*4
Driver door key-linked lock input Driver door key cylinder off Pulse generation
G78-24 (UL3) - Body ground*5 LG - Body ground Driver door key-linked unlock input Driver door key cylinder turned to unlock position Below 1 V
G78-24 (UL3) - Body ground*5 LG - Body ground Driver door key-linked unlock input Driver door key cylinder off Pulse generation
G78-12 (UL2) - Body ground*6 LG - Body ground*3
L - Body ground*4
Driver door key-linked unlock input Driver door key cylinder turned to unlock position Below 1 V
G78-12 (UL2) - Body ground*6 LG - Body ground*3
L - Body ground*4
Driver door key-linked unlock input Driver door key cylinder off Pulse generation
G78-7 (LSFL) - Body ground*1 B - Body ground Front door LH unlock detection switch input Front door LH unlocked Below 1 V
G78-7 (LSFL) - Body ground*1 B - Body ground Front door LH unlock detection switch input Front door LH locked Pulse generation
G78-18 (LSFR) - Body ground P - Body ground Front door RH unlock detection switch input Front door RH unlocked Below 1 V
G78-18 (LSFR) - Body ground P - Body ground Front door RH unlock detection switch input Front door RH locked Pulse generation
3E-32 (LSR) - Body ground*1 Y - Body ground Rear door RH unlock detection switch input Rear door RH or LH unlocked Below 1 V
3E-32 (LSR) - Body ground*1 Y - Body ground Rear door RH unlock detection switch input Rear door RH and LH locked Pulse generation
3C-41 (LSR) - Body ground*1 Y - Body ground Rear door LH unlock detection switch input Rear door LH or RH unlocked Below 1 V
3C-41 (LSR) - Body ground*1 Y - Body ground Rear door LH unlock detection switch input Rear door LH and RH locked Pulse generation
3E-33 (BCTY) - Body ground LG - Body ground Back door courtesy light switch input Back door open Below 1 V
3E-33 (BCTY) - Body ground LG - Body ground Back door courtesy light switch input Back door closed 11 to 14 V
3E-8 (TR+) - Body ground*7 R - Body ground Back door lock motor unlock drive output Back door opener switch (open switch) pushed 11 to 14 V
3E-8 (TR+) - Body ground*7 R - Body ground Back door lock motor unlock drive output Back door opener switch (open switch) not pushed Below 1 V
G78-17 (KSW) - Body ground*2 R - Body ground Key unlock warning switch input No key in ignition key cylinder Pulse generation
G78-17 (KSW) - Body ground*2 R - Body ground Key unlock warning switch input Key in ignition key cylinder Below 1 V
G78-23 (BDSU) - Body ground*2 R - Body ground Back door opener switch input Back door opener switch (open switch) pushed Below 1 V
G78-23 (BDSU) - Body ground*2 R - Body ground Back door opener switch input Back door opener switch (open switch) not pushed Pulse generation



CHECK CERTIFICATION ECU (SMART KEY ECU assembly) (w/ Smart Entry and Start System)


a.

Disconnect the G82 certification ECU (smart key ECU assembly) connector.

B264892N74
1.948,0.583 2.333,0.833 0.385,0.25 3.302,0.583 3.688,0.833 0.385,0.25 4.885,0.583 5.271,0.833 0.385,0.25 2.031,0.635 2.49,0.938 0.458,0.302 10 G82 3.385,0.635 3.854,0.927 0.469,0.292 10 G83 4.969,0.635 5.292,0.844 0.323,0.208 10 G84


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
G82-11 (E) - Body ground BR - Body ground Ground Always Below 1 Ω
G82-2 (+B) - Body ground W - Body ground Battery power supply Always 11 to 14 V


c.

Reconnect the G82 certification ECU (smart key ECU assembly) connector.


d.

Measure the voltage according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
G83-27 (TSW5) - Body ground Y - Body ground Back door opener switch (open switch) input Back door opener switch (open switch) pushed Below 1 V
G83-27 (TSW5) - Body ground Y - Body ground Back door opener switch (open switch) input Back door opener switch (open switch) not pushed Pulse generation
G83-28 (TSW6) - Body ground L - Body ground Back door opener switch (close switch) input Back door opener switch (close switch) pushed Below 1 V
G83-28 (TSW6) - Body ground L - Body ground Back door opener switch (close switch) input Back door opener switch (close switch) not pushed Pulse generation



CHECK DOUBLE LOCK DOOR CONTROL RELAY assembly (w/ Double Locking System)


a.

Disconnect the G187 double lock door control relay assembly connector.

B409283N01
3.094,0.125 3.573,0.354 0.479,0.229 3.177,0.167 3.792,0.365 0.615,0.198 10 false G187


b.

Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.


Tester Connection Wiring Color Terminal Description Condition Specified Condition
G187-7 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
G187-11 (CPUB) - Body ground V - Body ground Battery power supply Always 11 to 14 V
G187-12 (+B) - Body ground G - Body ground Battery power supply Always 11 to 14 V


c.

Reconnect the G187 double lock door control relay assembly connector.


d.

Measure the voltage and resistance according to the value(s) in the table below.

Tester Connection Wiring Color Terminal Description Condition Specified Condition
G187-1 (ACTR) - Body ground LG - Body ground All door double lock motor set off output Double lock set → not set Below 1 V → 11 to 14 V → Below 1 V
G187-3 (DLPL) - Body ground P - Body ground Rear door LH side double locking switch input Double lock not set 10 kΩ or higher
Double lock set Below 1 Ω
G187-4 (DLPR) - Body ground P - Body ground Rear door RH side double locking switch input Double lock not set 10 kΩ or higher
Double lock set Below 1 Ω
G187-5 (DLPP) - Body ground P - Body ground Front door LH side double locking switch input Double lock not set 10 kΩ or higher
Double lock set Below 1 Ω
G187-6 (DLPD) - Body ground B - Body ground Front door RH side double locking switch input Double lock not set 10 kΩ or higher
Double lock set Below 1 Ω
G187-8 (ACTS) - Body ground L - Body ground All door double lock motor set on output Double lock not set → set Below 1 V → 11 to 14 V → Below 1 V